I am working on the motor mentioned in the topic line.
Compression is even at 120 psi on all cylinders. Brand new after market stator and trigger testing at 1400 + ohms (spec is 1100 to 1400) with good solid spark on all three cylinders. Rebuilt carbs and adjusted floats and l/s needle to...
Hi there,
I have an '89 Force 85hp with no spark. I have the Seloc manual and have gone through the test procedures. This is the Prestolite CDM system. With my Merctronic peak volt meter I am getting a reading of 20 on the 600v scale from both sets of blue / yellow output wires. I am fairly...
