Recent content by jhromeli

  1. J

    Force 1984 85 HP, not firing cylinder 1

    Hello all, I have this problem in my outboard, It was running good during summer, then at the end of summer last time we use the boat sometimes it was working like missing power on one cylinder, I change Spark plugs, check all fuel lines, then I didn?t use the boat. Yesterday I try to start the...
  2. J

    Tilt and Trim down , Reparation done, Working Great, Thanks to the Forumoutboard

    Last weekend I worked to rebuild the hydraulic pump of the tilt and trim system of my Force 1985. I followed the procedure on Sticky files, no problem, very easy to follow, and now my check valves work great and hold the outboard with zero movement. I am really happy , without this forum I will...
  3. J

    1984 Bayliner capri BR 17 Ft. Force 85 hp question

    Hello all: I am the new owner of a 1984 Bayliner Capri BR 17 Feet, with Force 85 HP. My question is regarding the tilt and trim System , which works fine up and down , but once up on tilt position it will fall down in minutes. I have been reading in different posts about this failure and it...
  4. J

    Johnso super sea horse 35 HP fuel delivery problem 1959

    Hello all: I am rebuilding a super sea horse 1959 35 Hp, I rebuild carburetor, fuel pump, impeller, point and coils, the motor so far starts, but only with the prime from the gas tank ( a minute or so), once it is finished the engine stops. The pressure line , you can feel the pressure, then I...
  5. J

    No water Pumping johnson seahorse 35 Hp 1959

    Hi every one The motor starts real good in the first attempt, so I think I did a good job in the magneto area, now my problem is that I can?t get the water pumping , I change the impeller and after this, I test in the barrel and I don?t get the water flowing in the thermostat housing is totally...
  6. J

    change impeller 35hp super seahorse

    Hi every one , I am rebuilding a 1959 super seahorse 35 hp , so far I have done points , fix the exhaust plate, new sparks, the engine starts real good at the first time ater 15 years of storage , but i have been Reading a lot in the forum and every one said its very important to change the...
  7. J

    Rebuilding a Duracraft 17?

    Rebuilding a Duracraft 17? long Hi everybody , this is my Project, rebuild a old Duracraft Boat i think is a 1964 or something like that, the engine is a 35 HP Super Sea Horse , 1959. Does any one know the model of this boat by Duracraft Any Advice , will be appreciate.
  8. J

    nut size 35hp super sea horse 1959 rds21

    anyone knows the size of the flywheel nut i think is a 19/32 fine thread , am I right? Thanks in advance
  9. J

    water in bottom cylinder super seahorse 35hp

    Hi everyone I am trying to restore and old Johnson Super Sea Horse a RSD21 I think is a 1959, my main problem refers to water in the bottom cylinder I already change the head gasket 2 times , with no luck, the compression test is around 100 PSI each cylinder. When I run the motor in the tank it...
  10. J

    Spark Problem please help

    Hi every one I need your help I am kind of tired, I check the spark on the spark plugs and I didn?t have a spark in the bottom cylinder (The one it was damp or Wet when i run the engine, so I take the flywheel off and check the condenser, points and coils everything ok ( points and condenser are...
  11. J

    question Johnson 35 seahorse 1959

    Hi every one I am from Mexico and , I am New in the boating thing, about 12 years ago a neighbor of mine almost give me for free one duracraft 1959 17 Feet boat and a Johnson 35 hp super seahorse 1959 , I love mechanics so 12 years ago I start working on it , but I had plans to marry and buy a...
See more
Top