Well I finaly ran a leakdown test and found a problem with #3&4 cilinder. I ran combustion chamber cleaner through all the cilinder and I think this cured my oil usage problem. I put 80 miles on it today and used no oil. Back to the leakdown #2&3 are bad. #1&4 tested 4 lb drop at 90 lbs supply...
Where can I find a online service manual for a 2006 115 Evenroude ETEC or the factory manuals tat come with the motor? Need to check all the wiring during instal of a used motor. Manuals did not come with it.
John
I bought a 2006 Etec from a dealer. After I got the title I talked to the original owner. He said that the motor was on it's 3rd power head and on the 3rd power head he had to put a fuel injector in #3 cylinder. Lost #2 cylinder on both power heads. He said he ran synthetic oil on the first...
I had the transom replaced in my boat and want to make sure I drill the new motor mount holes at the correct hight. I have a Haynie 18' flat tunnel with a keehole transom. I am going to run a115 Etec with a CMC 6" jack plte. I have been told to set the jack plate flush with the top of the...
