Please note that the PICTURE UPLOAD function is not working. The iBoats Forum Moderators are working with the system administration folks at the parent company to get the issue resolved. This happened about a year ago and here we are again. In the meantime you can post photos as links to a picture hosting site of your choice. We are sorry about the inconvenience and will advise when the issue is resolved. Thank you for your patience.
Once again greetings from England.
My pal has given me a spare lowrance ethernet cable. The one with yellow connectors.Would it be feasable.useful or practicable to connect a Lowrance hds-7m to a Lowrance hds-5x sonar. I have a lowrance nmea2000 system already!
Regards
Greetings once again from England.
This is for the technical experts on the forum. Can you help me?
I am constructing a nmea 2000 system to join a hds-7m unit and a Lowrance elite-7x sonar/fishfinder. The first step is to connect my Lowrance HDS-7M stand alone plotter to the nmea2000 network.
At...
Greetings from Great Britain.
I am considering installing a lowrance 2000nmea back bone starter system to connect Lowrance hds units. The basic system over here plus extras are quite expensive! I have been offered parts from a garmin nmea 2000 system left over from a recent boat install. Would...
Hello All,
Mariner 2.5m 1998 2.5hp
s/n OP005244
Non Shifting (Direct Drive)
Can anyone give me some advice regarding the installation of a second kill switch to be mounted on my boat console? A distance of ten feet.
Would this be fairly easy for a novice diyer?
The existing switch is situated...
Hello from England,
1998 Mariner 2.5m 2 stroke
Serial Number:op005244
I was talking to a fellow boat owner @ my sailing club and he informed me that there is virtually little difference between a Mariner/Mercury 2.5hp and a 3.3hp 2 stroke and it is possible to increase the power on my 1998...
Hello from England, A friend has given me a second hand fibre glass vhf antenna to be used as a spare for my fixed dsc/vhf radio. Unfortunately the antenna cable is only 2 feet long. Obviously the cable is too short.The cable is a standard marine type RG-58 with a PL259 connector. Is it possible...
Hello from the UK.
I am in the process of installing an 2000lb rated 12v electric winch to my roller coaster trailer. To those not familiar with the manufacturer it is simply a trailer fitted with rollers not bunks. The winch comes complete with a steel wire winch rope...I have never been happy...
Greetings from the UK.
Make/Model:Mariner/F20E.(Standard Shaft/Electric Starts/with remotes)
Date of Manufacture:September 2008
Engine Number:OR276478
Can anyone tell me the correct tachometer switch setting for my outboard?
My quicksilver tachometer has a number of settings. 2p4c/ 3p6c/...
Hello from england, I have just serviced the cooling system and replaced the impeller, pump housing etc the full kit.Now water pours from the hole where the shift rod enters the lower unit.The lower unit has been dismantled 3 times to check that the water pipe is fully installed yet the problem...
