I believe it does bottom out I’ve cleaned it throughly looked into the hole for maybe an obstruction but appeared clean, Im at a complete lose I have not changed anything, with all honesty the choke has never worked since I’ve owned the boat, so I removed it cleaned it up changed the terminal on...
I’m ganna see if I can flip the strap so the post on the solenoid is under the strap near the half circle cut out. Other then that the solenoid cannot move any further down thus allowing the butterfly to close even more. If I move it the other way that would make the choke butterfly’s not open...
So I’ll try that but what I’ve noticed is the choke solenoid has been adjusted to the point where the metal retaining strap is millimeters from making contact with solenoid post. In other words choke solenoid has been pushed down about as far as it goes an the butterfly’s only close a quarter of...
Hello all I’m having a really weird issue with my choke plunger/ orientation on my 1987 bayliner Capri with the Force 85 hp motor, recently I discovered my choke not activating with the key switch so I decided to take it off an clean all the contacts an now when I put it back together the choke...
