I recently purchased a 1988 16? Sea Ray Seville with a 100HP Merc/Sea Ray engine on it. Took it out for the first time yesterday and it ran very well for the most part. There are, however, two problems:
1) Slow Acceleration ? I?m not expecting to take off like a rocket but I do know it...
I'm about to drop the lower unit on my 1988 Merc/Sea Ray 100 HP outboard. Just had a nightmare of a time putting the lower unit back together on my 70HP Evinrude (couldn't connect the shift rod). Since I actually want to take the boat out tomorrow I can't spend hours and hours trying to put...
Can someone please tell me how to get to the shift rod on my 1985 Evinrude 70hp VRO? The VRO itself seems to be blocking access to it. Do I need to remove it?
Dropped the lower unit in my 1985 Envirude VRO 70hp. Problem 1: Not sure how I disconnected the shift rod. I removed the cotter pin from the shift arm and after much "jiggling" I was able to get it free. Not sure if that's what's causing problem #2. I think it is because I can drop the...
I have a 1985 Evinrude 70HP VRO outboard with power trim. I removed all the bolts I could find but for some reason the lower unit won't come off. I recently removed the lower unit off of a 35hp Merc, without power trim, no problem at all. The issue with the 70HP seems to be with the front of...
I recently bought a 1985 Bass Tracker with a 70HP Evinrude VRO outboard. Whenever I start the engine it quickly stalls. I noticed that it's getting fuel into the filter after squeezing the ball. After it runs/stalls, however, the filter goes from being full to about 2/3 empty.
Can someone...
