I cleaned the carbs put new gas in it.it has 120 compression on all cylinders.when I started it it was running ok then revved up to 3500 rpm and ran like that for several minutes then idled down.then it revved up again.when it's running it sputters thru the bottom carb and a puff of smoke will...
First the model number on the engine bracket is e90tleor.the problem is this engine is an electric shift engine.the freeze plug on the engine has a j3688986 stamped In it.can anyone help me find out what I have.thank you very much
I have a 150 Suzuki ss for sale.it broke a ring.the foot has been rebuilt and carbs were also rebuilt.some new parts.the power head has been disassembled.have controls and wiring also.looking to get around 500.thanks.you can email me at lwhiteb@aol.com
i have a 88 dt 150 that one side of the engine was getting oil and the other side isnt.im wanting to just pre mix my gas and oil.i called browns point and they said i can but i need to take off the oil injection and remove the oil gear from engine.has anyone else done this.please any help is...
i have an 88 dt 150 s.i have found another powerhead but its a 86 model.will my parts interchangewith this powerhead.will this powerhead work.i would need to use my heads.will my carbs and all bolt right up and all the electronice.thanks for any help guys.
i have a 88 or 89 suzuki dt 150 ss.one piston has scored the block.my question is.can you bore one piston with out problems.or can you change the cylender and change that piston and rings on the rest of those pistons.without problems.any help would be greatly appreciated.im new here and need...
i bought this 274 fs and i think i got a good deal.there isnt any rot anywhere.but a couple of seats do need to be recovered.it has a johnson 120.it has been sitting so i cleaned everything and it fired rite up.all cylenders had over 120 compression.and like i said the floor and transone are...
