Recent content by meantobe63

  1. meantobe63

    Bravo shifter / throttle install on a gen 2???

    Ok, so will I need custom cables adapters at the throttle / gear selector or at the engine / transom, or will they operate correctly by just replacing a "alpha style" with a "bravo style". Like, the throw of the cables will be correct?
  2. meantobe63

    Bravo shifter / throttle install on a gen 2???

    Well shoot, I googled Bravo shifter with gen two drive and found nothing. Apparently it's not a "bravo" shifter. thanks.
  3. meantobe63

    Bravo shifter / throttle install on a gen 2???

    Seriously? I can't find anything about it and figured maybe the brackets and cables would be of different lengths or something for the different shifters / drives.
  4. meantobe63

    Bravo shifter / throttle install on a gen 2???

    Is there a way to install a separate forward/reverse shifter and have a throttle only on a Alpha One Gen Two like a Bravo has? I can't see why not, but can't find any info. With how much our lake feels like an ocean, I'd love to be able to idle and just shift forward and reverse without the...
  5. meantobe63

    cleaned out the flame arrestor and "found" this cool thing....

    That’s the plan. Gloss black most likely and I’ll sand down the cover with some fine grit to almost polish it. Also looking to make a cover for valve cover that’ll look similar to sticker that was on there.
  6. meantobe63

    cleaned out the flame arrestor and "found" this cool thing....

    While cleaning my filthy, probably never cleaned since new flame arrestor, in a fab shop, this cool little cover appeared all of a sudden.... LOL
  7. meantobe63

    1969 Mercruiser 120 shift interrupt issues

    Kenny
  8. meantobe63

    1969 Mercruiser 120 shift interrupt issues

    Thanks Kenny, that makes more sense that it was possibly done last time cables were adjusted and not from the factory. Definitely didn't see that in the directions of adjusting cables, haha, but makes sense. So I am glad it was in there when I did and now I know. I guess I really won't know...
  9. meantobe63

    1969 Mercruiser 120 shift interrupt issues

    Hello, I bought a 1969 Tom Sawyer with a Mercruiser 120, so from my research it's a MC-1 outdrive??? It does not have trim sending unit switches which is a bummer but maybe wasn't available that early. Anyways, struggled to get it out of forward and reverse when we took it for a spin to make...
  10. meantobe63

    2006 Mercruiser 3.0 Swap to 1987 Mercruiser 260

    After not being able to get over 20mph with MANY attempts of fixing this, changing that, I’m swapping my 135hp 3.0 over to a 260hp 5.7. It will fit, BARELY, and will take plenty of fab work for engine mounts, adding a center toon, etc., that I’m capable of doing myself. I would never even think...
  11. meantobe63

    Alpha 1 gen 1 mercruiser 260 and gen 2 gimble

    recently purchased a 1987 Sea Arrow with a Mercruiser 260. Looking to use the engine and whatever else needed to swap out my 2006 3.0 with a Gen 2. I know the v8 runs a 1.50:1 ratio and my gen 2 is a 2.00:1. I’d prefer to keep my gen 2 and regear if needed. I’d assume the engine will bolt to the...
  12. meantobe63

    24ft Suntracker 3.0 I/O with 40% prop slip

    Bought the boat a year ago and tachometer didn’t read correctly. Mercruiser with Alpha one 2.0 gear ratio. With the prop that came on it, a 16x14p, I’d only get 16-17mph with 4 adults and 3 kids. This year with the new tach, I’ve ran this prop again and getting 4000 rpm. At that rpm and speed...
  13. meantobe63

    Will a 140 I/o (Serials 4920217 + 4907327) be a straight swap with a 1963 110 ?

    Found a complete I/O on Craigslist for cheap but motor most likely will need rebuilt. Has everything, steering, tilt, trim, etc. the straight horsepower should be nice but more interested in it for parts availability and tilt and trim since mine has neither
  14. meantobe63

    I KNOW, I KNOW, there's a Bible about serial numbers but I'm cunfused.

    A boat I might buy to swap the complete sterndrive, etc for has these stickers on valve cover. I haven't seen in person, looks like a late 80's Bayliner. I can see on the pic on middle of valve cover that it's a 181cu in. Any insight?
  15. meantobe63

    Steering..... Does this look normal, or even safe?

    After looking thru the Mercruiser I.D bible, I did not find a picture or description of this setup. It has the steering tube on the transom plate, but it's not being used and the cable is directly hooked to steering arm.
See more
Top