On the last two photos you can see the gap from bottom going up and getting bigger so I’m wondering if fiberglass it until it’s thick enough?
Or do epoxy with 406 and some fiberglass broke into it and paste
i compressed it to the inner and already fix the gaps between the wood.
Wood is water seal with west system epoxy and fiberglass.
I gonna get a better picture to explain my dilemma to how to fill the gaps I’m talking about
Hi everyone.
I got stott craft 1986 14ft bass boat.
The transom was rotten so I try my first transom rebuilt.
So far everything solid but I’m stock at finish line.
All the gaps in the picture is filled.
My problem is when I put the outside layer back I have a gap between the outside layer and...
Transom was rotten middle mostly side was not as bad but I broke it off.
Planing on making a cut in the front to check floor but it feel solid old owner hit the motor and crack the transom with the two bolt clamps so water got in there.
Hi everyone I got my first project boat.
It’s 1984 stott craft 142 bass boat made of fiberglass,
I’m doing transom rebuild so I cut the back and took all the rotten leftover wood out.
I attached a picture but my transom isn’t straight it have a small curve as a triangle shape.
Can I cut the...
I get this boat for free.
The pictures I took are the only damage areas.
Can it be brushed out and then weld aluminum plate on top or it?
Planing to just have it for my family on small lakes near clermont Florida
Hi everyone I’m new here and hope I do it right.
I have an option to get sun tracker pontoon 21ft 2001 and each side of the toons have a hole and some area look a bit rough and thought to ask here is it repairable or not worth fixing? Motor and everything else is fine on it.
I attached some pic...
