Recent content by Mytox

  1. M

    force 120 prop shaft seal part #'s?

    Hi guys. I discovered milky-oil in the gear-case and I'm fairly certain it's from water coming in at the prop seal and not from the top of the housing and so will pressure test without removing the leg to confirm. I guess if it does show oil leaking at the seal it doesn't mean the top end is...
  2. M

    1992 Force 120 tilt piston/cylinder fix or replace?????

    Hi guys. This related to a couple other threads I'd started looking for advice on my tilt/trim assbly. I ordered a kit to rebuild the assembly (which includes the five SS screws for the trim cover - good luck finding those in northern Canada) but this note was appended to the description: *...
  3. M

    1992 Force 120 power tilt/trim - blew a seal??? and trim piston cover issues

    Aside from having only the top three SS screws connecting the trim cover and now the piston's out of alignment and does nothing...seems to be stuck from the lid not being square, I had just topped up the reservoir which was low and cycled the tilt part of the system a couple times to bleed it...
  4. M

    1992 Force 120 Trim issues (SCREW (1/4-20 X 1-3/4") (#10-F1959) NLA )

    Does anyone know where I can get 5 of these screws for the trim unit?
  5. M

    1992 Force 120 gear case cover removal - advice please

    Hi there. I'd posted this previously, and I'm really looking for advice on how to safely remove the gear case cover on my 1992 120 Force, so that I can access the fitting to reconnect the shift shaft which was unscrewed and removed. I had some instructions from Jerry but I was concerned about...
  6. M

    1992 120 Force ............CATASTROPHIE!!!!!

    Interesting that there's another posting about a 120 HP Force shift rod. I had just changed the impeller and water pump in my 1992 120 Force, and my son was carrying the bottom end out to the boat to help me reinstall it, and he kind of slipped on the stair and ended up dropping the unit and...
  7. M

    1992 Force 120 Water Pump replacement

    I'm replacing the water pump on my '92 120 Force, and purchased the kit FK1204-1. The kit contained a black rubber washer the same ID as the shaft (basically an o-ring with flat edges/sides). This appears to be a seal for the top of the water pump, although I'm not sure where it goes as the...
  8. M

    1992 Force 120 Water Pump replacement

    I'm replacing the water pump on my '92 120 Force, and purchased the kit FK1204-1 as in the attached image. The kit contained a black rubber washer the same ID as the shaft (basically an o-ring with flat edges/sides). This appears to be a seal for the top of the water pump, although I'm not...
  9. M

    1992 force 120 water pump question

    Hi there. My 1992 120 waterpump has a stainless steel insert and when I search for the replacement, #FK1204-1, and look at the images of the pump kit parts, they almost all don't show the stainless insert. Anyone have any experience with these pumps? Thanks Rando
  10. M

    1992 Force 120 Water Pump Kit

    I'm looking to purchase a complete water pump kit for a 1992 Force 120, but am having trouble figuring out the part number. The pump I need has the stainless steel insert. Any leads and possibly a Canadian supplier? Thanks Randy (Mytox)
  11. M

    carb spewing fuel when prime bulb pumped

    Engine - 1992 Force 120 HP Okay. Based on other posts, I think I've narrowed down the problem of the upper carb spewing fuel when I pump the the prime bulb or turn the motor over. Here's some history. I was trying to disconnect the fuel line feeding into the TEE connector on the bottom carb...
  12. M

    Force 120 1992

    I have a 1992 Force 120 leaking fuel from the top carb when I pump the bulb or turn the motor over. Carburators are Tillotson #820203 (top) and #820195 (bottom). Any advice on solutions and where I can order carb kits and what the part number is? Also I live in northern Canada and shipping...
See more
Top