Recent content by ninamy

  1. N

    90 Force 90 HP....water pump?

    That is not the hole where the water comes out from the cooling system... You should take the engine cover off and there should be another hole where the water should come out... As you can see here: Sometimes there got something stuck inside the rubber hose.
  2. N

    Force 70HP 1991 2 stroke Wiring Diagram

    And yes! I received the Aliexpress CDI today, connected it, and the motor runs perfect! See video: https://drive.google.com/file/d/12kcHPEN7QPUTOg_8d4eQ_qym7zMk9JAG/view?usp=sharing
  3. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Thanks for your reply! A couple days further of thinking what it could be i figured out it is not the starter. Bought a new one and it goes faster but not an significant change. I also figured out the following: every time i come at my storage to try to start the engine i have an spark, so...
  4. N

    Force 70HP 1991 2 stroke Wiring Diagram

    I think i found the problem, i measured the voltage coming from the stator, this should be between 180 and 400 volts but it is 135 volt, so i think the starter is not making enough RPM's for the spark...
  5. N

    Force 70HP 1991 2 stroke Wiring Diagram

    As i can see on Ebay should this be the correct stator: 8778A29 But i see 6 wires instead of 4...
  6. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Ah, that could be the case then... The 2 green wires from the stator are ging in the candybar...
  7. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Here you can see the white/green and green/white wires are original with the Red stator...
  8. N

    Force 70HP 1991 2 stroke Wiring Diagram

    I have a red stator, with 2 yellow wires, a white/green and a green/white. That's also why the "candybar" adaptor is between it and i've red somewhere on a forum that with that stator there is no need for the red wire?
  9. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Yes, i found everything out and connected it to an Sierra 6 wire key switch on the right positions. Unfortenatly i still don't have an sprak on the spark plugs:(
  10. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Now i'm facing the following: the old owner did cut the 8 pin connector off. So i have an 3rd party contact switch but i need to know which wires should make contact with eachother when in Off mode, On mode, Start mode and i can push the key in to Choke i think...
  11. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Thanks! I see a couple of wires that are corresponding, i'm gonna try it!
  12. N

    Force 70HP 1991 2 stroke Wiring Diagram

    Dear iBoats members, I'm new to this forum, i was redirected here in my search of an wiring diagram for my Force 70HP 1991 outboard motor. I bought this motor with the knowledge that the wiring is a disaster and now i'm trying to fix things, the startmotor works, trim/ tilt works also but i...
Top