Nordin's latest activity

  • N
    Nordin reacted to WinnerCougar74's post in the thread 1974 Chrysler 135 hp limping with Like Like.
    I know the prices for parts, I want people to be able to keep their Chryslers going. Plus, I hate filling up landfills.
  • N
    Nordin replied to the thread Does anyone know what this plug is called ??.
    The engines in the pictures are a Yamaha and a Mariner (same as Yamaha but different color). In range 4-8Hp.
  • N
    Nordin replied to the thread Does anyone know what this plug is called ??.
    These grommets are common on 70.es and 80.es japanese engines such as Suzuki, Yamaha, "japanese built" Mariner and maybe Tohatsu...
  • N
    Nordin reacted to racerone's post in the thread Back into the 1989 85hp rebuild with Like Like.
    Put a helicoil in the plug hole.----And cylinder head does NOT need to come off.
  • N
    Nordin replied to the thread 1985 Force 85 tilt/trim motor question.
    You have to pull the brushes back when reassembling the board were the holders for the brushes are mounted. Maybe use some tooth picks...
  • N
    Nordin replied to the thread What oil to run in trim/tilt shock absorber?.
    If using ATF beware the oil can eat the seals and it starts to leak again. The T&T require 30Wt non detergent, other multi grade 30W oil...
  • N
    Nordin replied to the thread What oil to run in trim/tilt shock absorber?.
    I have never opened up a shock absorber to refill the oil but the T/T system on Chrysler/Force engines used to need 30Wt non detergent...
  • N
    Nordin replied to the thread 1987 mercury 75.
    6218795 and if 3 cylinder, it is a 1982 year model. Not a looper, it is a cross flow with low domes at the pistons. Sorry did not read...
  • N
    Nordin replied to the thread 120hp Force year?.
    The Force 120Hp came in 1990 and as it has the Force style LU and not the Mercury style it is an 90-94 year model. From my experience...
  • N
    Nordin replied to the thread Reeds?.
    Try to prime the bulb easy when starting warm and feel if it is firm, our you can add some fuel to the bowls. Maybe the bowls are not...
  • N
    Nordin replied to the thread Reeds?.
    I assume you have checked and set the floats in the carbs soo they are parallel with the casting when turned upside down. Do you prime...
  • N
    Nordin reacted to Capt dave 258's post in the thread Stop switch location? with Like Like.
    Yes sir, that was the problem! I deeply appreciate your help. Thank you so much for taking the time to help me. I will pay it forward.
  • N
    Nordin replied to the thread Stop switch location?.
    The issue is that you have the black wire connected at the I terminal at the keyswitch. Remove it and isolate it at the terminal pad. No...
  • N
    Nordin replied to the thread Stop switch location?.
    The blue wire from the other M terminal at keyswitch should go back to the terminal strip at the engine and be connected at the second...
  • N
    Nordin replied to the thread 1988 125 hp Force rebuild.
    The gasket for the exhaust tube F439736 is N/A and if it is bad you have to make one of your own. If it is bad exhaust will leak and...
Show older items
Top