Hello,
I just purchased a 1964 18HP johnson that is in need of repairs and a tune up. Previously I posted a topic on the replacement of the impeller on a 1964 5.5HP Johnson and was told that the powerhead would have to be removed. I am wondering if the same circumstances apply to replacing...
Hello,<br /> I have a 5.5HP 1964 Johnson that is in need of repair. The recoil spring broke after six pulls when I tried to start it. That didn't give me enough time to tell if it wasn't getting spark or if it wasn't getting fuel! After purchasing the motor I found an extra fuel pump and two...
I recently purchased two used Mercury boat motors with fuel lines and a tank. The tank is an OMC tank. The fuel lines have an OMC connector on the tank end, and a Mercury connector on the motor end. I have not ran these motors yet, but was wondering if there is a problem with running the fuel...
I would like to know the recommended sparkplug and gap for a 1956 5 HP Seaking. It currently has AC 45's in it. The motor runs well but seems to flood out easily. I have not had it out on the water yet to fine tune the idle adjustments.Thank you for your time! Ownsbud56
I would like the assistance of this great forum to ID an old Evirude Sportwin. Model#4423,Serial#31709. I have no idea what year or what HP it is! Any information on this motor would be appreciated! The experts of this site have never failed me! Thank you for your time! Ownsbud56
Hello,<br /> I just acquired a 5HP Sea King in above average original condition! It has had the conversion to a remote tank and came with the original owners manual! I can't find a year of manufacture anywhere in the owners manual. any help would be appreciated. the Serial number is 55x602331...
I was told the ratio on a 1964 5.5 Johnson that I own was 50:1. Is the same ratio used on the 1963 5.5 Evinrude or is it 24:1? Thank you for your help!<br /><br /> Ownsbud56
Everyone on this site is always helpful when a year of manufacture is needed! 5 1/2 HP Johnson Model#CD21A, Serial#J2421287. Thanks Again!<br /><br /> Ownsbud56
I have a 50HP Evinrude #E0001085,#50443M that I would like a year designated for it! Good solid motor that I am not sure of the year of manufacture due to conflicting information from the previous owner. Thanks for your help! Ownsbud56
I have just purchased a 15HP Evinrude Short Shaft Model #E15 RENM, Serial #Go3167472. The previous owner stated it was a 1993 but purchased late in 1992. Just wanted to know which year and any help would be appreciated! It also has a stainless steel prop, can this prop be used on the similar...
I would appreciate a year of manufacture on a Hiawatha 7.5hp Bailmaster. Serial#43652431 and Model#65-OM3-25-7985A. Owner stated that it was parked 10 years ago because it had a water pump problem? (Impeller) He said that the parts were no longer available. I am thinking that this was built by...
I don't know if the year is correct on this motor.The model and serial #'s are 10018/12512. The owner says the shift lever is broken but does shift back and forth between gears. I guess this to be just a parts repair/replacement? He also states that the prop is in good shape but needs replaced...
I would appreciate any information as to the year of manufacture on an Evinrude 6HP Model#6604A,Serial#J00583,a 8HP Johnson Model#J8RCCS,Serial#B7636108,and a 6HP Chrysler Model#62HG,Serial#13468. Thanks to anyone who can help! Ownsbud56
This site is so helpful to the novice! I would like the year of manufacture,HP rating,and the actual manufacturer of a model#15GG-9015, Serial#411275, Sea King motor. Thanks to everyone for there help!<br /><br /> Ownsbud56
I just purchased a 12hp Seaking Serial#65X620297,and Model #GG9016B. I would like to know what year it is,manufacturer,and what type of tank I will need! Motor seems solid and has good compression. What oil mix is advisable for this motor? Thank you for your help!<br /><br />...
