Pmt133's latest activity

  • P
    Pmt133 replied to the thread Best flooring options?.
    I like the EVA. I will admit that most of the quotes I got they told me to expect 10 years at best out of it. The good stuff installed...
  • P
    The cockpit cover on my 4 winns is 22 years old now. Sunbrella. Water proofed it 2 or 3 times over the years. Still beads and runs right...
  • P
    They all suck. The ZF in the rams is going to be the least sucky of them imo. But they all have the same issues honestly.
  • P
    Again, derivative from that program. Not direct joint venture but an off shoot of the program. All developed and loosely based around...
  • P
    Which is why I called it the ford version. You wouldn't even think they were the same transmission driving both. The 10 speed Allison is...
  • P
    The 33 has been in as late as Christmas. The 4 winns gets laid up if it gets cold beginning of November. In the winter I spend money on...
  • P
    Pulled my boat out yesterday in prep for fall/winter fishing season. Fish until the fish migrate out of the area or weather turns bad...
  • P
    Pmt133 replied to the thread 215 sundowner transom.
    Read the thread. There are a few things glossed over in the video that are properly addressed in the thread.
  • P
    Thinking about it... most model designations don't make sense. Like how the le is the low end in toyotas line up but then the XLE hybrid...
  • P
    Pmt133 replied to the thread 215 sundowner transom.
    Yes, Jay's is the one I read through dozens of times before I even thought of doing this. I should've linked that as well. @todhunter...
  • P
    Pmt133 reacted to todhunter's post in the thread 215 sundowner transom with Like Like.
    @Pmt133 did a great job. I spent about $10k - $11k on mine, but it was now several years ago. Another in-depth documentation thread if...
  • P
    Pmt133 reacted to Scott Danforth's post in the thread 215 sundowner transom with Like Like.
    There is also Frisco's thread in the stickies which was done as a training/ education thread for the iBoats forums
  • P
    Pmt133 replied to the thread 215 sundowner transom.
    The only original wood left were the sides of the cabin walls. I went very overboard and completely rerigged as well. Included in my...
  • P
    Pmt133 replied to the thread 215 sundowner transom.
    I measured the deck bulkhead to the cabin, side box width, where the cutout for the engine was, where the seats were, any visible...
    • 20240702_141028.jpg
    • 20240311_155502(1).jpg
    • 20240307_180230(2).jpg
    • 20240716_191649.jpg
  • P
    Pmt133 replied to the thread 215 sundowner transom.
    Take a lot of measurements, make a drawing, take photos. The engine mounts its easier to just hang the motor on the transom, slide the...
Top