Recent content by ric67

  1. R

    floor repair

    hi, it all started when i bought new sleeper seats for my 1968 141/2 ft k&c. when i removed the built in seat bases the fiberglass pulled away from the plywood. believe it or not after i removed all the glass execp for around the edges were it meets the hull because that is still suck good the...
  2. R

    cutting out at high rpm

    have a 91 70 hp johsnon vj70eleie-had siezed middle piston-o/haul power head with new pistons and o/hauled carbs. on the break in it ran sweet, idled great and i thought all was ok but when it was time to open it up it would cut out at 5300rpm--used toget at least 5500 at anytime before with...
  3. R

    were to drill the block to relocate peehole?

    hi, got a 1991 johnny 70 horse-vj70eleie-i would like to do the update on the water tell tale but don't know were to drill the hole to relocate and is drilling the hole all that has to be done thanks
  4. R

    how to richen up the mid range

    i burnt up my middle piston in a 1991 70 hp--vj70eleie-and have read that they go lean at cruise throttle. how do you richen it up--jets?? adjsutments? thanks rick
  5. R

    seized middle piston-91 70 hp-vj70eleie

    have it in the machine shop. going to go 30 over in the middle and hone the outers and just re re ring. using all the same brgs look good. have read some thing about re locating the pee hole and an updated themostat spring but is this my problem. i don't really know 2 strokes , does the way i'm...
  6. R

    1991 70 hp jumping out of gear??

    i've got it apart and the dog and gear have some wear but is it enough to make it jump out? is the shift rod adjustment maybe some of the problem? and does anybody no the spec for this? one more ") i'vegot about 20 thousands end play on the drive shaft. is that normal or do i need to remove the...
See more
Top