Hey guys,
Just got done replacing water pump and noticed the shift shaft seal is leaking.
I am looking at the parts diagram and starting to wonder if I am missing seals on it as it is. (I just got this boat from an auction) It seems to run great on the Muffs but noticed oil seeping out of...
Hey guys,
I know this may be a little too generic but I was curious... (search function mainly shows me people with yoke issues)
Ive been looking at boats and been on the fence on a really clean 1995 Sprint FS277 with a 125hp Mariner motor for 10500.
My past experience with Merc was a 92...
Hey so sadly enough my motor the other day just died out of no where on the way home when i was cruising around 3/4 throttle for a few minutes 3-4 mins.
seems like the middle cylinder has some aluminum build up from the piston using a camera to look inside. I haven't checked anything yet but...
Hey guys,
couple quick questions about the tilt and trim pump i have.
1st question is... I noticed a tiny but of oil on my garage floor over this winter and noticed the pump is leaking ever so little at the white fitting you see in the picture.
Assuming possibly that odds are its just an o...
Hey,
So ive been debating on fixing this crack for some time now as its an eye soar for the most part. How would I go about fixing it? I bought the boat like this so no idead how it happened but from the looks of it, it prob hit a dock or something pretty hard in its time. I also want to fix...
Hey so as title states I got a 1992 Merc 75hp 3 cyl OD176094 key intermittently not working.
Basically its a 1 in 20 odds that when you go to turn on the motor with the key nothing happens, if you cycle it a few times it has so far "fixed" itself and will turn the motor over.
I am just...
Trying to delete the alarm on my 92 merc 75 hp 0D172094
I havent been able to test which wire to unplug but I know where the alarm module is located.
I quickly tested to see if my sounder would beep if I turned the key to the on position to show its working and it beeps.
I removed the tan...
I cant seem to find what this part is for! hard to search for it in the online manual too when you have no idea what its called.
Does this line go anywhere?! what is it for? where does it go... last thing I need to figure out before finishing this and running it
Hey lads,
So im trying to put together a list of things I would need if I where to change the swivel pin / yoke assembly
My main concern is, I read somewhere but I can't find the info again that either the pin or the yoke was updated to Stainless material instead of the original steel yoke...
Trying to find a list of parts for what goes here, Ive looked at several charts but doesnt help I dont know what its called to pin point what I need.
See pics for reference.. any help would be great!!! worse comes to worse I can remove this bracket and get a machinest to weld / refil it...
As tittle states... how do I tell what fuel pump rebuild kit to buy. How can I see if I have the 90deg elbow or a inline check valve?
did a search and couldnt find anything on it for the most part.
Thanks,
Jesse
So ran into a few issues with my first outing on my boat, 1992 sea ray 160 with a 92 75hp merc
I deleted the oil pump by removing the impeller and shaft I reconnected the oil lines however I cut the line in between the fuel line and pump and capped both of them off.
Drained old fuel put in...
Hey ladies and Gents,
So a buddy and I just recently picked up a sea ray 160 with a 75 merc on it thats been sitting for the past year and a half or so.
We have a couple plans for it.
For starters we will be removing the oil injector system and doing our own pre mix. I had already read on...
