Recent content by Rockbottom707

  1. R

    Service manual #36

    Does anyone have the 2020 version of service manual #36? I have the 2006 version. Tried to order one 2 weeks ago but they are still 4 weeks out. I’m trying to get the part numbers for the inboard wiring harnesses. Specifically I‘m trying to verify which harnesses use the cam sensor and which...
  2. R

    383 strokes conversion.

    Thanks for the help. I‘ll give John a call.
  3. R

    383 strokes conversion.

    I pulled more ecm info from the scanner: 383 SXP ECM# See decal Cal# 8M2005192 AAAF_0008_383_EFI Desired idle speed 700 rpm TPS .22-.90 at idle. TPS 3.91-4.88 wot Fuel Pressure. 24-30 psi sea pump 0.5-15psi fuel pump and per relay 81-99 ohms Fuel injector 12 ohms iac 10.1 ohms fuse A-B IAC...
  4. R

    383 strokes conversion.

    ok, while cranking I’m getting about 250-300 rpm. It fires up for 2-3 sec then dies. In the freeze frame pcm data rpms say 567 rpm. Now I’m getting fault codes fuel injector 1 open and fuel injector 2 open And 2 beeps from alarm every minute. I have 12v at injector plug and all injectors are...
  5. R

    383 strokes conversion.

    Thanks for the reply. I have the two plug ecm555 with the flat top distributor. I will check today to see if I have 300+ rpm when cranking.
  6. R

    383 strokes conversion.

    Hi all, I‘m new to the forum. Hopefully someone will be able to help. Last year blew my 5.7 2bbl inboard. I bought a 383 bravo stroker off Craigslist. Serial plate is missing. Supposed to be a rebuilt motor. The ecm says 6.2L Bravo. The air cleaner cover has the 383 sticker and it has...
See more
Top