I have a 1990 Bayliner with a 90 HP force L drive, and the exterior exhaust bellows are leaking, I want to replace them but, they are well over 200.00 dollars at the dealer. I was wondering if anyone new where I could get them used or if there is something else I could use.<br />Thanks for the...
I have a 1990 Force 90 HP L drive and I can't get the engine to rev over 2000 in the water, won't get on plane. Seems to idel ok and if you just crack the the throttle open a little she'll run pretty well but, when you open it up to get on plane it goes to around 2000 rpm and won't accelerate...
Is this a good motor? I have an opertunity to buy a 1965 chriscraft 17 foot boot with this morter on it.I don't care much for the boat as I do for the motor. :p
I have a 1990 Bayliner capri with a Force 90 HP L drive, I want to change the powerhead. I would like to know if any powerhead off of any Force outboard will fit. I seen several Force outboards(no L drives)on ebay for a very fair price. Please help.<br />Some say it will and some say it needs to...
I really need to know what size prop you are running, My force L drive will not rev past 3.000 rpm and I belive it is the prop, any help would be very helpfull.
I have a 1990 Force 90 H/P L drive that will not go past 3k rpm under way and will not plane out. Comp check is good, fuel pump is cleen. Prop is correct. Please help<br />Thanks Ron
I have a Force 90 h/p L drive, Everyone tells me that it is an outboard mounted on the inside, With this in mind will any force 2cyl motor fit this set up? I have an opertunity to buy 120 h/p and a 85 h/p force outboards and I was wondering if the power head would interchange on my 90 h/p L...
I have a 1990 90 H/P Force L drive engine, The number 3 cylinder has water in it and when you try to start it with the spark plugs installed, water is pushed out the front of motor around the gasket area. I pulled the plug and it blows out water in the number 3 plug hole. It was over heated for...
