I do not understand what is going on with my port motor when I turn the key nothing happens no gauges for port side and no trim and tilt at shifter on port side.Everything is working fine on starboard side.I check the trim and tilt at the motor and it working fine.I read the Manuel and tested...
Can someone tell me what holds the lower unit on a 15hp Johnson 1991.I have removed 6 bolts near the foot and loosened the shifter cable near the foot but it still has something stopping it from coming out because I can get it down so far then it stops I have also tried turning the fly wheel...
I have a pair of 2004 Evinrude ficht 225hp out boards and the starboard motor has had intermittent problems with the oil light and buzzer coming on and then the motor drops down to a low speed. I normally just replace the number 7 fuse in the motor and everything seems to work. This has been...
I have a Evinrude ficht 225hp 2004 and it has been interment blowing the number 10 fuse for oil pump and in the past I just change fuse and bring it back to shop and they try to get it to blow after 4hours of running the motor hard they could not get it to blow the fuse. I then went out for...
I own a 29 ft with twin 225 evinrudes in November I was towing a boat in trouble to the dock and was working my motors a little bit harder then normal. I ran them about 4600 rpm when the starboard motor lit no oil so I looked at it and could not find out why there was no oil getting to the...
