Current visitors

Home
Members

Scott06's latest activity

Scott06 replied to the thread Seized Lower Shift Cable Nut.

Take it off ( bellhousing) if you can do the work great otherwise Take it to a machine shop. Use an end mill to cut it flush, drill out...

Apr 21, 2025
Scott06 replied to the thread Help me identify what engine I have in my new boat.

i just punted on serial number/year but it does show a wedge used with the weber carb...

Apr 21, 2025
Scott06 replied to the thread Trouble re-mounting lower unit.

wonder of the water tube is misaligned - the one that comes up from water pump to underside of upper. also think that with 1/2" the...

Apr 21, 2025
Scott06 replied to the thread Trim Hydraulics.

I would take the lines of the cylinders see if they bind up when compressing they should move freely by hand otherwise may have to take...

Apr 21, 2025
Scott06 replied to the thread Looking for exhaust rubber connectors/couplers.

that will be based off your engine serial number. these sites can take your serial number and direct you to the correct parts...

Apr 21, 2025
Scott06 replied to the thread One riser 60 degrees hotter.

Yeah I wouldnt worry too much unless it gets to hot to leave your hand for a few seconds.

Apr 19, 2025
Scott06 replied to the thread Mercruiser 120 poor starting.

May be other issues but if you dribble gas down car and I won’t fire then you are missing spark. This assumes the engine has decent...

Apr 19, 2025
Scott06 replied to the thread No water coming out of the exhaust on muffs.

More or less . Look at plugs see what they look like , will tell you a bit on what’s going on. fuel filter is number one default check...

Apr 18, 2025
Scott06 replied to the thread Stupid me, no oil.

Boat was under water , if you look around drain plug there is little to no glass on bottom of wood may have soaked it then. if it...

Apr 18, 2025
Scott06 reacted to Bondo's post in the thread Engine runs for 1 minute and stalls, then starts with no problem. Merc A1G1 140 HP with Like.

Ayuh,..... Those never fill, Full,..... Yer not even supposed to have that sorta filter in yer boat,..... It should go from the...

Apr 18, 2025
Scott06 replied to the thread No water coming out of the exhaust on muffs.

A couple of things maybe to look at before diving into carb Empty the fuel filter into a jar and look for debris and water...

Apr 18, 2025
Scott06 replied to the thread Help me identify what engine I have in my new boat.

Oh yeah it would seem he is full of chit. Unless it was a 2bbl carb then going to 4 bbl yes would expect more power. See what he gives...

Apr 18, 2025
Scott06 replied to the thread Help me identify what engine I have in my new boat.

More than likely there was something wrong with the old carb. Sounds like if it wont idle idle passages are clogged or set too lean. at...

Apr 18, 2025
Scott06 replied to the thread No water coming out of the exhaust on muffs.

water outlet tube either on end of plastic pump housing or up in underside of upper where water tube lands. might be better to start...

Apr 18, 2025
Scott06 replied to the thread 3.0 mercruiser dieseling.

Around 2003 they went to 160 for emissions reasons. My carbed engine if that vintage has 160

Apr 17, 2025

Show older items

Home
Members

Top