Current visitors

Scott06's latest activity

Scott06 replied to the thread 2012 3.0L TKS runs great with muffs, but slow on lake....

I think when it doesnt restart take a spark gap tester see if you have spark if you do dribble some gas down the carb , if it restarts...

Friday at 7:41 AM
Scott06 replied to the thread 2 Stroke Oil Thread.

That is about what I was running my old Evinrudes on. Almost zero smoke and very clean plugs. Had a 1975 15 hp , and a 1973 9.5 hp...

Friday at 7:38 AM
Scott06 replied to the thread 2 Stroke Oil Thread.

I started running amsoil in our old evinrude 2 strokes...

Thursday at 5:05 AM
Scott06 replied to the thread 1979 Starcraft American Offshore 22’.

Yeah see that now , didn’t think they made FG boats back in 79. Just the usually stringers and transom on glass boats of that age

Wednesday at 8:14 PM
Scott06 replied to the thread 1979 Starcraft American Offshore 22’.

what is the powertrain in it OB or IO? if IO certainly look at the bellows. Both will need impellers replaced. If I recall older...

Wednesday at 12:47 PM
Scott06 replied to the thread 28' Pontoon with 3.0 Mercruiser Prop.

the sharrow threads make me miss the oil threads...

Wednesday at 7:55 AM
Scott06 replied to the thread alpha 1 gen 1 noise.

Split the halves to see if it can be isolated upper and lower - at this point you are into tearing it down to see what the issue is-...

Wednesday at 7:19 AM
Scott06 replied to the thread Need help reinstalling choke linkage (Mercarb 1389-9562 carburetor).

thats the accelerator pump lever. you will have to take the top off the carb and there is a set screw holding to to the pump inside the...

Sep 30, 2025
Scott06 replied to the thread thinking of a Delco EST ignition system conversion but have a few concerns.....

If you can still get good sets of replacement points I wouldn’t spend the money for the delco. I filed and gapped a set of points this...

Sep 29, 2025
Scott06 replied to the thread alpha 1 gen 1 noise.

pull the drive check the gimbal bearing first, as by the mouse I’m thinking that. If that is ok drain drive lube and pull the top cap...

Sep 29, 2025
Scott06 reacted to Scott Danforth's post in the thread CORRECT bolts for 3.0/3.0LX Manifolds with Like.

Stock bolts are grade 5 Grade 8 is fine Cutting bolts down or using washers is fine Your overthinking it

Sep 28, 2025
Scott06 replied to the thread Need help: Bizarre Bravo III freshwater galvanic corrosion quandry.

I was surprised at how much more ‘active’ the oem ones were Vs aftermarket. Of course this is a sample size of one…funny thing is seeing...

Sep 27, 2025
Scott06 reacted to alldodge's post in the thread Need help: Bizarre Bravo III freshwater galvanic corrosion quandry with Like.

In my findings aluminum is best for B3 and fresh water Also the amount of anodes used must be done with knowing the voltage reading...

Sep 26, 2025
Scott06 replied to the thread Need help: Bizarre Bravo III freshwater galvanic corrosion quandry.

not sure where you get your magnesium annodes from, but I also had some corrosion on a fresh water alpha gen 2, Lift kept and there is...

Sep 26, 2025
Scott06 replied to the thread Loosing Faith in Humanity . . ..

Also plan on getting a tax document from ebay. I so,d a machine from work on my eBay acct ended up getting a 1099 or similar for $8 from...

Sep 26, 2025

Show older items

Home
Members

Top

View All

View All

View All

View All

View All

View All

View All

View All

Boat Bimini Tops

Boat Covers

View All

View All

View All

View All

View All

View All

View All

Scott06's latest activity

Follow Us