For my 87 150 evinrude. Good compression all cylinders. Pulled intake and found 2 reeds missing. They appear to be a fiberglass composition or some other plastic/resin composition. Since they are not metal and I cannot see anything do I still have to tear apart the powerhead or would they have...
I have a 87 150 evinrude. Would not WOT. All ignition checks OK. All compression checks OK. Removed carbs for rebuild. I can see at least 2 reeds missing. Next I am going to pull the intake. I have read that I must find the reeds. If I do not find the reed parts. Can I pull the heads without...
for you experienced mechanics: 87 150 evinrude: found bad power pack. Installed new one. The volts at the coils is 220. Book says 250 and the other power pack does read 250 at eack coil. Is that a tolerable difference or should I take the power pack back.
motor is evinrude E150STLCUR - 87 I think. Runs at idle will not accelerate. Installed a fuel pressure gage. At idle it reads zero. If you pump the bulb the gage registers (so I am sure its OK). Book calls for 1PSI at 600rpm. Sure seems like fuel pump is defective.<br /><br />I am using a...
