Hi Guys,
Not sure that this is the perfect sub-forum for this, but it seems most logical for the moment.
We had the unfortunate luck a couple of weeks back of finding a rock shoal in our lake that we didn't know about before.
As a result the lower unit and propeller were replaced. The prop...
Just had a compression test done on a boat I am looking at with an inboard 1999 Mercruiser Alpha One 3.0L .
All cylinders came back at 169 or 170 psi.
From my research, I have had trouble finding whether the PSI readings are within the acceptable range.
I know about the 10-15% rules, but from...
I need to get to the tilt control, as the switch needs replacing...
To do so you have to take off the entire speed control box.
I have gotten it apart, removed the bolts and screws that I can see holding it in place, but I am stuck! It is looser, but won't come apart.
Am I missing something...
I believe my engine is misfiring..
The engine starts .. though it takes a few more cranks than usual..
nothing noticeable when you are just reversing the boat out.. or starting off.. but when you put any load on it, it boggs.. and clearly sounds like it is misfiring.. but I can't be 100%...
Hey guys,<br /><br />Looking for a bit of insight here..<br />The boat is a '90 Doral TRX with a 110 Evinrude V4 on the back.<br /><br />Problem: Charging issue; After having the boat for about a week, the boat wouldn't start. Took it back to the marina, where they checked the power pack, etc...
This friday I will be looking at a 1990 Doral Bowrider with a 110 Evinrude outboard on the back.<br /><br />The boat looks like a beauty, but want to make sure the engine is up to snuff as well!<br /><br />What I am curious to find out (as I am relatively new to boating - spent more of my time...
