After installing the flamethrower coil and the pertronix ignation upgrade i found that i had to turn my distributor quite a bit counterclock wise what im sure is advancing it. I had to turn it all the way to the other side from when i had my points in to be able to get it to fire and run and be...
Hi everyone, I'm seeking some help with installing a pertronix ignation on my AQ151..
First off I was having re-starting problems once the boat was out in the water and running for 20min or so, after I switch her off see didnt want to start again so I was able to trouble shoot that I had a bad...
Hi everyone, I'm seeking some help with installing a pertronix ignation on my AQ151..
First off I was having re-starting problems once the boat was out in the water and running for 20min or so, after I switch her off see didnt want to start again so I was able to trouble shoot that I had a bad...
Hi to all...
Well iv'e got another question about the proper gap for my AQ151...I have the workshop manual of this engine and under
Setting for regular gasoline,min 91 octane ROT:
Basic setting.............6deg BTDC (0-14.17r/s=0-850rpm)
Strobscope setting.....32-36deg BTDC (70 rs/=4200 rpm)...
Hello to all...
First off all i would like to say that i'm new to owing an in board out board boat.I joined this fourm seeking to find out and read as much info i can about the Volvo Penta AQ151..
I own a 1989 SunnRunner with a Volvo Penta AQ151 with a 290 Drive...
Ill give a quick overview of...
