Stinnett21's latest activity

  • Stinnett21
    Stinnett21 replied to the thread I/O (Sterndrive) Conversion to Outboards.
    Following but getting lost. Do I understand correctly that you're building the bracket yourself but contracting out the actual repower...
  • Stinnett21
    Stinnett21 replied to the thread Spark plugs and cap replacement interval.
    The manual for my 2002 5.0 MPI specifies plug changes every 300 hours. I don't have it in front of me but I don't think it specifies a...
  • Stinnett21
    Stinnett21 replied to the thread Best flooring options?.
    In regard to fishing I suppose vinyl would be noisier right?
  • Stinnett21
    Stinnett21 replied to the thread Prop Swap opinions....
    BTW, assuming your 4.3 has power steering you don't need the trim fin zinc. You can use the flat zinc disk. Glad you're getting great...
  • Stinnett21
    Stinnett21 replied to the thread Prop Swap opinions....
    If you start changing prop families, brands, number of blades, etc. things get experimental. As you stand right now you are queued up...
  • Stinnett21
    Stinnett21 replied to the thread Prop change on my bowrider.
    A 21 4 blade will behave like a 23 3 blade, probably too much. I'd try a 21 3 blade. But first, check your tach. I would not expect a...
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    The rev limiter is your WOT. Report your readings at the rev limiter.
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    As previously said you need to go WOT to get an accurate baseline. Just do it momentarily enough to get a reading and back down. You...
  • Stinnett21
    Stinnett21 replied to the thread Knocking when turning.
    My screw up one time was when in went to put the drive in forward gear prior to removal I pushed the button and went full throttle...
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    MBAKER, in your original post you list BS Pro props. I had never heard of it. Appears to be a Korean aftermarket brand. Could be good...
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    Turning Point and Solas make decent props it's just that their quality control is not what you will find with homegrown Mercury or...
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    The Spitfire is Mercury's attempt at building a Rev 4 out of aluminum. So it doesn't surprise me the thicker aluminum 23 matches the 21...
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    If you are not carrying as much weight as before and you are having to throttle back to not exceed operating range I would change to a 3...
  • Stinnett21
    Stinnett21 replied to the thread aluminum prop comparison.
    As a starting point put your info into the Mercury Prop Selector and see what it spits out.
Show older items
Top