I have a - 2001 E175FPXSIF and have just bought a donor engine - 2003 E175FPXSTF with a blown cylinder (cheap). Is the 2003 return oil pressure valve part Number 5001054 compatible with the 2001 engine (its a different part number 5000518 and It looks different) If not can I change over the...
Having replaced the water pump due to ripping the hub out of an impeller (probably due to high rpm's on a low pitched prop - 18p) and stripping and cleaning the poppet valve assembly at the same time (was fairly dirty) the water pressure gauge now reads 6psi at idle, 15psi at 3000 rpm and 24psi...
Serial number odo29976, resurrected after 10 years of no use.
replaced stator (low resistance on one side) , trigger (wire insulation problems) and switch boxes (bias outside specs) all cdi, coils tested OK new plugs NGK buz8h surface gap.
fully rebuilt fuel system everything seems to work...
In rebuilding my 85hp Johnstone 2 stroke I needed to build some specialised tools for the Link and Sync they include;
1/ A four plug air gap spark tester
2/ piston stop tool
Both took less than an hour to make, cost virtually nothing and work a treat
I have enclosed some photos to help with...
Very new to this posting business, actually my first!
Looking to buy a Merc 2.5ltr 200hp Xri EFI that looks like it has not done much work (told that it has 40 hrs on the clock). The serial number is 0D029976 (Australia) .
The problem is that the boat and engin have been on the street for...
