tg3690's latest activity

  • tg3690
    tg3690 reacted to redneck joe's post in the thread Random with Like Like.
    Do NOT let your wife see this...
  • tg3690
    tg3690 reacted to redneck joe's post in the thread Random with Like Like.
  • tg3690
    tg3690 replied to the thread Ugly Impeller.
    The shaft looked good. I was just surprised how bad that impeller looked. Most of the time they almost look good enough to reuse. But...
  • tg3690
    tg3690 replied to the thread Ugly Impeller.
    It's the one that came with the kit I bought from MasterTech......I believe it is a GLM kit, with new housing, bolts, gasket, and plate...
  • tg3690
    tg3690 posted the thread Ugly Impeller in Force & Chrysler Outboards.
    Put a new water pump kit on my motor last week. It has been about 3 1/2 years since I changed this one. It is by far the worst looking...
    • IMG_2743.jpg
    • IMG_2744.jpg
  • tg3690
    tg3690 replied to the thread 1986 85hp force 856X6L---Oil Plug retap.
    You might try posting in the Restoration forum or the Boat Topics and Questions forum about what paint to use.......there are lots of...
  • tg3690
    tg3690 replied to the thread 1986 85hp force 856X6L---Oil Plug retap.
    Before I painted my LU I considered leaving it bare aluminum. I polished it up good with some Flitz and it looked good. After one use...
  • tg3690
    tg3690 reacted to Nordin's post in the thread Reeds? with Like Like.
    I use razor blades, pocket knifes or putty knifes when removing old gaskets at smaller parts. At lager parts/surfaces such as bottom of...
  • tg3690
    tg3690 reacted to aspeck's post in the thread Random with Like Like.
    My wife asked for some peace and quiet while she made dinner so I took the batteries out of the smoke detector. My wife shouted across...
  • tg3690
    tg3690 reacted to dwco5051's post in the thread Random with Like Like.
  • tg3690
    tg3690 reacted to redneck joe's post in the thread Random with Like Like.
    https://www.facebook.com/share/r/1BigkLTfSX/
  • tg3690
    tg3690 reacted to redneck joe's post in the thread Random with Like Like.
    https://www.facebook.com/share/r/1Dq7WEBhGh/
  • tg3690
    tg3690 replied to the thread 1986 85hp force 856X6L---Oil Plug retap.
    Nice work on that tapping job. I use yellow teflon tape on the threads that is made for natural gas lines and is oil resistant. Has...
  • tg3690
    tg3690 reacted to jerryjerry05's post in the thread 1986 85hp force 856X6L---Oil Plug retap with Like Like.
    Over the years of owning lots of Forces, this spot caused the most aggravation. It would weep oil no matter what I did to seal it. I...
  • tg3690
    tg3690 replied to the thread 1986 85hp force 856X6L no spark.
    In most cases, you HAVE to do your own work on these motors. The shops around here will not even look at an old Chrysler or Force, let...
Show older items
Top