Hello. I replaced my points and condenser this morning. I need to adjust dwell and timing.
Does anyone have specs for 87 OMC 4.3L 4 barrel rochester
Dwell?
Timing?
Rpm? whats should RPM be at idle or fwd gear?
Thank you.
HELLO. I GOT MY ENGINE RUNNING LAST NIGHT. REPLACED THE CONDENSER DUE TO NO SPARK. ALSO FOUND CARB IS LEAKING FUEL FROM THE RIGHT SIDE. (ORDERED REBUILD KIT)
WHAT OTHER COMPONENTS SHOULD I SERVIC BEFORE I GO OUT WITH MY FAMILY?
Hello. I'm getting my starter rebuilt at shop but they want to know what engine does my OMC 4.3l is compatible with in the automotive world. chevy?
Boat is a 1987 Sea Ray s19
Thank you
Anyone have a extra copy of a 1987 Sea Ray S19 owners manual. I need to look up the wiring diagram. I have no power to the ignition. Any ideas? Fuse box? Thank you
Hello, After Discovering my transom was full of corrosion and pitting. I finally decided to put and aluminum plate over the existing transom. I want to riveted it all together. The question I have what type of Epoxy or Hull-Thru silicone should in between the transom and plate?
I purchased a boat about 8 months ago. It's under restoration. It has a Garmin Gpsmaps 235 sonar. It has the antenna and transducer. Any one have an idea I get for it? Thanks
I found this 1989 Lowe 17ft bass boat on CL. Comes with an older 65hp evinrude. Asking price is 1000 or best offer. The owner removed the transom wood because it was rotten. He said he has no time to finish it. I already have a 1996 tracker, but has leaking rivets, a small leaking hole and a...
Hello, I'm removing my 1997 Mercury 75hp of my 1995 tracker v17. I'm going to do some transom work and rivet repairs. Im using a cherry picker to remove from the transom but I do not have an engine stand or anything to hang it on. I was thinking of laying it on its side on a old tire I have...
Since I removed my deck, trolling motor and all accesories. How much do you think my Aluminum Bass Tracker 17 v would weight with engine removed. ? ? Since I'm doing the transom and rivets, I was just thinking of taking my time and replacing almost all rivets. Any thought on this project? ...
Removed foam early in the morning. Filled up boat with water, about 8 inches. Right away found 3 leaking rivets up front, 4 rivets down the middle, 1 hole in the center lower part of boat. Also found water coming out of Livewell port next to the boat drain. The last leak I found was...
Im ready to perform a leak test on my tracker. The guy I bought it from said that it did leak. In order to begin the process, do I have to remove all the foam throught the boat. I noticed that some foam was loose under the floors. Attached is a pic of my main floor.
What is the correct way to...
Im looking for a boat repair shop in southern California. I need some rivets repaired on my bass tracker and my hull and transom checked. I live in san fernando Valley. Or someone that knows how to do the work at home. Thx
I'm planning on changing my deck color from black to gray. I also want to change the color of the edge of the boat. Please see picture for description. I want to know how to remove the black rubber seals to replace the carpet. Advise would be greatly appreciated. Thx
What is a MANUAL DRAIN VALVE? I'm replacing and testing my livewell. Next to the fish tank I noticed a lever that can open a drain plug. When will I need to use this and what does it do? Is it part of the live well feature? Thx
I've read a lot of post about rivets and sealers. Im ready to drill out old rivets and put in New ones. What is the best rivet to use and what size. I have 96 tracker aluminum boat. What drill bit will I need and what brand of rivet is the best. Please reply if you have done this job. Ib know...
