GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
Looking for any ideas on an issue I've had for a couple weeks I've got a 2006 Larson with a 350 mag mpi problem is at 2500-3500 rpms the motor will missfire but below or above that range runs fine and now if I'm trolling around for a while at lower rpm the engine will stall some times and it...
I was wondering if anyone on here has upgraded their camshaft in their 350 mag mpi I've got a 2006 larson 226 and wanting a little more power and looking in to whipples upgraded ECM and a set of high flow exhaust manifolds looking for a mild cam upgrade nothing to wild
Looking for some help I have lost the top end on my 2000 vip 5.0 mercruiser 1.63 out drive. I went from running 53 to 54 mph last year to only getting 43 to 45 this year. I gave the boat a tune up plugs wires fuel filter cap and rotor cleaned the flame arestor I'm running the same 14.24 x 21 ss...
Hi I'm looking for help on my exhaust I have thru hull exhaust on my 2000 VIP it's sounds nice but the water cops seem to like to bother me about it what parts do I need to convert to thru lower unit
I own a 20 foot VIP with a 305 alpha drive not happy with the performance. Looking to swap to a 383 marine crate motor this winter anyone do this swap and will my out drive handle around 350 horse?
Just got a torque shift prop 932 can't get it to shift its on my 20 foot I/o with a 305 merc I'm runnin w cams and 30 lb springs which the prop came with the hole shot is crazy but won't shift up played with the trim does not make a differance any help would be great thanks
