My 15 hp, 1995 Evinrude won't idle down without dying.
I have cleaned and rebuilt the carb, rebuilt the fuel pump, and replaced the fuel line between the pump and carb. No change.
Joe Reeves says to start adjusting the idle mixture jet at 1 1/2 turns out and adjust in (CW). Clymer says start...
I would appreciate any help given on what the orginal markings were on a 1995 15hp evinrude tiller handle. Also what is the purpose of the button on the end of the handle?
I found a loose wire hanging down under the power head on my 1995 15 hp Evinrude on the port side. It appears to have been attached to a bolt with a crimped on connection that does not show signs of a recent break. I can't trace it. Is this a ground wire? I thought it might possibly be for the...
All of the markings on my 1995, 15hp Evinrude are worn off. Could someone please explain what markings should be there. What is the button on the end of the handle for? Is all the way closed idle or cut off?
Thanks
I rebuilt the carb on my 1995 15 hp Evinrude. Every thing was clean as a whistle except the area under the metal plug near the main jet. There were a number of loose black particles between the larger outer tube and the smaller inner tube. The particles were to large to have passed through the...
Motor idled well on flusher at home. First time on water, motor started and idled fine. After warming up I ran for 100yds. and motor died. It would start on second pull after one pull on full choke but wouldn't idle so I could not put it in gear. Now it won't idle on flusher. New fuel tank with...
