Recent content by Vendi1986

  1. V

    Volvo penta 4.3 flooding

    Thank you for info. I will check float and luckily I have new one, I'll try to replace it and let you know.
  2. V

    Volvo penta 4.3 flooding

    I understand that more you screw needle and seat, float goes down meaning less fuel in the bowl. If I turn bowl upside down, float/needle is closing. There's no air leaking inside
  3. V

    Volvo penta 4.3 flooding

    I'm sorry but I really don't know what you mean by that. I can disassemble carburetor tomorrow and post photos here if that will help
  4. V

    Volvo penta 4.3 flooding

    Float is bent so it can get less fuel in the bowl. Arm itself is intact. As I said before, in my workshop it's not flooding. Only when it's mounted on engine.
  5. V

    Volvo penta 4.3 flooding

    I really doubt that it can be problem because I drove that boat for last 2 seasons with same carburetor and everything was fine.
  6. V

    Volvo penta 4.3 flooding

    I didn't mix oil and gas. I thought gas itself mixed with oil because of flooding. I believe that human can blow more than 5 psi. Used also air compressor and there's no air inside of the bowl. Luckily I have spare low pressure pump brandnew and tested it... Same thing happens. First start...
  7. V

    Volvo penta 4.3 flooding

    I was thinking of changing oil. Maybe it mixed oil and fuel and it backfires. Sorry my english is not that good.
  8. V

    Volvo penta 4.3 flooding

  9. V

    Volvo penta 4.3 flooding

    I can take it apart and show you float and everything you want. It's written on the bowl Demon even holly gaskets are exactly the same but I ordered demon set also because of PV and needle\seat
  10. V

    Volvo penta 4.3 flooding

    Hi, It's needle and seat. There's no spring in it. I even tried to lower the float and still it's flooding. I have tested fuel pump at home... It was running for about 20 seconds. Fuel pressure is constantly 5.5.
  11. V

    Volvo penta 4.3 flooding

    Hi, I have problem with my volvo 4.3 engine. Carburetor is constantly flooding. I have bought 2 new rebuild kits and changed every gasket, PV, needles. Everything is cleaned and float is adjusted properly. It is 2 bbl Demon carburetor. I have tested float and there's no air leaking ( turned...
See more
Top