Current visitors

Home
Members

void7910's latest activity

V

void7910 replied to the thread Alpha One Gen 2 Gimbal Housing Anode - no wear.

Not terrible corrosion yet. A little on the trim rams and a bubble on the transom housing. Trying to nip it in the bud before it gets worse.

May 5, 2025
V

void7910 reacted to Scott06's post in the thread Alpha one paper gasket slppage with Like.

that's fine pretty typical that I see that. not ideal but never caused me an issue. You may have some material on the inside

May 5, 2025
V
void7910 posted the thread Alpha one paper gasket slppage in Mercury MerCruiser Sterndrives & Engines.

Hey all. Gathering opinions on whether this amount of paper gasket slippage is going to allow water ingress?
May 5, 2025
V

void7910 replied to the thread Alpha One Gen 2 Gimbal Housing Anode - no wear.

Yeah I was noticing that...where it installs on the gimbal though (stud?) should carry the connection through tho, no? I don't really...

May 5, 2025
V

void7910 replied to the thread Alpha One Gen 2 Gimbal Housing Anode - no wear.

It's a 20ft Glastron bow rider and I can assure the anodes do corrode in the fresh water I am in. The rest of the anodes (trim + prop +...

May 5, 2025
V

void7910 replied to the thread Alpha One Gen 2 Gimbal Housing Anode - no wear.

FWIW I can't get a reading on the meter between the screws when screwed in (without the anode) so I don't think they're making contact...

May 4, 2025
V

void7910 reacted to Bt Doctur's post in the thread Alpha One Gen 2 Gimbal Housing Anode - no wear with Like.

First make sure there is a bonding cable from the steering arm to the transom housing and from there to a bolt on the engine

May 4, 2025
V

void7910 replied to the thread Alpha One Gen 2 Gimbal Housing Anode - no wear.

Nope. No power while moored.

May 4, 2025
V

void7910 posted the thread Alpha One Gen 2 Gimbal Housing Anode - no wear in Mercury MerCruiser Sterndrives & Engines.

Just replacing my anodes and noticed the old on the gimbal housing has no wear. Grabbed a multimeter and sure enough no connection to...

May 4, 2025

Show older items

Home
Members

Top