Tilt trim solenoids

A

AFGguy

Cadet
Joined
Nov 25, 2024
Messages
11
I recently replaced the two sole kids on my 1987 Mariner 35. Now i get nothing when I try to raise or lower. Thinking it could be the motor, I connected straight to the battery and it worked fine. Now. I don't even get a click. Just nothing. Could I have the wiring wrong? Here are the pics to the TT solenoids and the starter solenoid. Any help would be greatly appreciated.
 

Attachments

  • 20250430_152536.jpg
    20250430_152536.jpg
    1.4 MB · Views: 5
  • 20250430_152533.jpg
    20250430_152533.jpg
    1.1 MB · Views: 5
  • 20250430_152528.jpg
    20250430_152528.jpg
    1.4 MB · Views: 5
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,906
Check for a blown fuse, otherwise need a voltmeter to trace voltages
 
A

AFGguy

Cadet
Joined
Nov 25, 2024
Messages
11
I get voltage to the starter solenoid, but nothing g form the tilt trim solenoids
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,906
AFGguy said:
I get voltage to the starter solenoid, but nothing g form the tilt trim solenoids
Click to expand...
With fuses good than guess is you left a wire off
The power comes from the battery to a the trim solenoids and to trim switch. The trim switch applies power to the solenoid when needed
 
A

AFGguy

Cadet
Joined
Nov 25, 2024
Messages
11
alldodge said:
With fuses good than guess is you left a wire off
The power comes from the battery to a the trim solenoids and to trim switch. The trim switch applies power to the solenoid when needed
Click to expand...
I'll have a look
 
You must log in or register to reply here.
Top