bravo one drive shaft.

S

steelerone

Cadet
Joined
Feb 21, 2016
Messages
9
installed new bearings per the manual but I can't get any resistance after tightening the nut all the way I double checked and everything is put back correctly
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,889
steelerone said:
I also have a beam inch pound torque wrench and neither one shows any resistance
Click to expand...
I'm not able to help if I'm not able to see what your seeing.

A beam wrench is good but if there is no means of actually seeing "max" torque than it's useless

Same goes for dial wrench

Need to be able to set a marker on the wrench and then rotate wrench. The marker will move based on amount of torque encountered.
 
J

Jesse Walter

Cadet
Joined
Jul 11, 2011
Messages
24
I just installed and set the resistance for mine today. I wasnt getting any resistance at first either. Just had to tighten the nut a little more. Then worked my way up very slightly checking each time.
 
You must log in or register to reply here.
Top