Harmonic Balancer pulley of Mercruiser 3.0 replacement

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
564
Can the pulley at my Mercruiser 2.5 replace 3.0? Current the mercruiser 3.0 was broken.

3.0 Serial No. is B785395
2.5 Serail No. is 0C397712

What kind of puller and installer is good for this project?

Thank you
 

Bondo

Moderator
Staff member
Joined
Apr 17, 2002
Messages
71,241
Thank you all

I have a old mercruiser 2.5 1989 and it worked. Can I take it off and mount it into Mercruier 3.0 ?
Ayuh,...... The pulleys maybe interchangeable, but the balancers are not,...
The 3.0 l has a balancer, the 2.5 l has just a pulley,......
 

Alumarine

Captain
Joined
Feb 22, 2005
Messages
3,749
Is the pulley you need the one that's on the water pump or the pulley that's on the front of the crankshaft?
 

kenny nunez

Captain
Joined
Jun 20, 2017
Messages
3,374
While the pulley and flange from a 2.5 will fit and work it is not the right part.
The 2.5 has a very smooth idle compared to the 3.0.
The 3.0 has more torsional vibration because of the longer stroke.
Make sure that the timing mark on the timing cover is the same as your 2.5 engine.
 

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
564
Is this harmonic balanced pulley great OT not?
 

Attachments

  • Screenshot_20250703-132554.png
    Screenshot_20250703-132554.png
    2.2 MB · Views: 6
  • Screenshot_20250703-132552.png
    Screenshot_20250703-132552.png
    2.4 MB · Views: 6

liusigou

Chief Petty Officer
Joined
May 11, 2015
Messages
564
How can I push the harmonic balance in? Rubber hammer or special tools?
 

Attachments

  • PXL_20250704_222119888.jpg
    PXL_20250704_222119888.jpg
    3.8 MB · Views: 5

Alumarine

Captain
Joined
Feb 22, 2005
Messages
3,749
How can I push the harmonic balance in? Rubber hammer or special tools?
Heat it up in an oven and tap it on.
Make sure you don't melt the rubber.
Google "heat harmonic balancer in oven" for some ideas.
 
Top