Challenging loading

T

TuffyGuy

Recruit
Joined
Jul 10, 2025
Messages
4
I inherited a 2004 Tuffy Esox, tiller. It's a heavy boat and I have trouble loading it, launching is fine. My son backs in the trailer and attaches the winch and has a tough time getting it all the way to the front. I'm thinking of putting in an electric winch, especially if I need to load it alone. He's worried about tearing the eye hook out of the boat. Any advise on how to make it easier to load? Thanks.
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
42,975
Welcome
Needs some clarification. I looked up 2004 Tuffy Esox boats and the heaviest one was a 20 footer at 1500 LBs. A boat this light should not take a lot to load.

Please help us understand the issues?
 
T

TuffyGuy

Recruit
Joined
Jul 10, 2025
Messages
4
It seems heavier, I was used to my old Alumacraft that was so light. I think the trailer needs tweeked. My Dad left it at the dock and only trailered it to move it to the garage and back to the lake. The bunks are probably not the best either. The tongue weight is very heavy, again relatively, probably 150#. Thanks guys.
 
T

TuffyGuy

Recruit
Joined
Jul 10, 2025
Messages
4
TuffyGuy said:
It seems heavier, I was used to my old Alumacraft that was so light. I think the trailer needs tweeked. My Dad left it at the dock and only trailered it to move it to the garage and back to the lake. The bunks are probably not the best either. The tongue weight is very heavy, again relatively, probably 150#. Thanks guys.
Click to expand...
The back of the boat is right at the edge of the bunks. Should I move it back to overhang the bunks, possibly lessening the tongue weight?
 
roscoe

roscoe

Supreme Mariner
Joined
Oct 30, 2002
Messages
21,784
TuffyGuy said:
The back of the boat is right at the edge of the bunks. Should I move it back to overhang the bunks, possibly lessening the tongue weight?
Click to expand...
NO. The transom needs to be supported.

To lessen the tongue weight, you move the entire axle forward.

Possible adjustments to make would include lowering the bunks, backing in so that only 1 foot of the bunks are above the water. Raising the winch so the strap is pulling level, or slightly upward. Getting a 2-speed winch.
Or replacing the bunks with rollers.
 
Scott Danforth

Scott Danforth

Grumpy Vintage Moderator still playing with boats
Staff member
Joined
Jul 23, 2011
Messages
50,796
I winch up my 4000# of boat about 2 ft to the bow stop with a manual winch

If I back in further, I can't line up the boat on the bunks, so I must crank it the last 2 ft.

One of these days I may install side guides

Your boat is fairly light. It should be easy to load

Has the winch been serviced?

Bunks or rollers?

How far are you backing in?
 
bajaman123

bajaman123

Petty Officer 3rd Class
Joined
May 6, 2009
Messages
99
The boat/trailer are fine...adjust your technique. What worked with the old boat DOESN'T with this one...plain and simple.
 
Sprig

Sprig

Chief Petty Officer
Joined
May 2, 2016
Messages
645
Has the winch been serviced?

Bunks or rollers?

How far are you backing in?
OP please answer the above previously asked questions. Those are key to advising you
 
A

airshot

Vice Admiral
Joined
Jul 22, 2008
Messages
5,616
Check the boats weight....waterlogged foam ? Trapped water in the hull ?
Rollers not rolling freely? Buns need new carpet or slick strips ? Or, as others have mentioned, you not getting the trailer at the right depth ?
Lots of options to help your issue......
 
You must log in or register to reply here.
Top