Boats from work.

FLATHEAD

FLATHEAD

Captain
Joined
Dec 29, 2002
Messages
3,703
alldodge said:
Post 146 Pic shows the screws can be gotten to easy enough, what am I missing?


So just use a standard screw drive with a long shank
Phillips
Click to expand...
I think what he is talking about is the upper screw has no depth for the screwdriver tip to go deep enough to get a bite?? Not sure.

If that’s the case I’d grind the tip down till it fits.
 
alldodge

alldodge

Moderator
Staff member
Joined
Mar 8, 2009
Messages
43,526
Ok thanks
That screw wasn't installed after the head light bracket was put together, the head light needs to be removed to get to it.

1screw.jpg
 
M

MikeSchinlaub

Chief Petty Officer
Joined
Jan 14, 2025
Messages
533
alldodge said:
Ok thanks
That screw wasn't installed after the head light bracket was put together, the head light needs to be removed to get to it.
Click to expand...
Probably the red ones. It was a single bracket for both lights, attached to the panel by the 4 blue marked bolts. I would have to have it in my hands to be sure about the reds.

Anyway, I got it out, so it's not a problem until I put it back.
 
M

MikeSchinlaub

Chief Petty Officer
Joined
Jan 14, 2025
Messages
533
Got the camper sprayed today. A bit over 12hrs in today.

20251028_195406.jpg

20251028_195414.jpg

This corner looked better before I sprayed it. :mad:
20251028_195424.jpg

Supervisor had to get up there and spray the tall guy stuff.
20251028_195845.jpg
 
M

MikeSchinlaub

Chief Petty Officer
Joined
Jan 14, 2025
Messages
533
Guess who gets to touch up the camper now. First the boss whacked it with the drill, but only a little spot, then when I was closing the lower part it hit on the upper panel. Didn't think to check alignment as it was being closed, we just lined it up with the panels on the side of the windshield and left it. Uuuuggggghhhhhh...
 
You must log in or register to reply here.
Top