Search results

  1. R

    Destroying my power pack

    1973 115hp evinrude # 115393m. With ign switch in run position and blk with yellow stripe wire to power pack disconnected from pp. Fluke blk to ground and red to wire Iv`e got 0.25 volts. I`ll replace ign switch. Can I run with bkl/yellow disconnected and use choke to kill motor? I can`t get a...
  2. R

    Gone and done it now, call me stupid

    Well, I`ve been working on this boat, it seems like all summer and I`m this close to being completed. So last night I decided to do a compression test. Here`s where stupid comes in. Start the motor to warm her up, shut her down , pull the plugs and screw in the compression tester (just using the...
  3. R

    Missing bellcrank bushing for barrel connector

    1973 115hp evinrude model, 115393m. BRP states in required colum that I need 3 (pn 0318590). Is this correct or do I only need 1? Thanks, Roger
  4. R

    Through away fuel pump. Rebuild kit ?

    My FSM says to buy a replacement fuel pump. However I was wondering if there was a kit out there that would work. I`ve searched but I couldn`t find one for this vintage. Rude 1973 115hp model # 115393m number on pump is 318374 Thanks to all. Roger
  5. R

    Can I run without air silcencer cover in place

    1973 115hp model #115393m rude. PO removed air silcencer cover, motor seems to run well, How ever I`m concerned about a hic up starting a fire, or the vacume (pick up lower carb port side not operating correctly) Does anyone have a spare they would consider selling me? Also I need to replace the...
  6. R

    Getting ready to seperate lower unit, a few questions

    We`re dealing with a 1973 115hp rude model # 115393m. Carbs have been removed for rebuild and bellcrank is also removed. Gear case is in neutral and old style barrel connector easly accesable. my questions are as follows. as I remove all bolts and begin lowering LU do I unscrew the barrel...
  7. R

    Been sitting 12 years

    Like the title says, it`s been sitting 12 years and i would like to do some prep work before firing it up. I`m a newb, and have been searching FAQ and forums to at least give the impression I know what I`m talking about. Here`s the skinney, 1973 16ft starcraft with a 1973 115hp evinrude, model...
Top