Search results

  1. S

    new product 6hp electric outboard?

    i think the brand name is torqueedo. they claim it can muster 6hp and runs for 3 hours on a charge. sounds like it would be good for a sm fishing boat...anyone have one?
  2. S

    need a carb cheap

    hi all, i need a carb on the cheap for a 1994 15 hp omc, i dont care if i have to rebuild it or not . any ideas? online stores/junk yards?
  3. S

    1994 jhonson 9.9 to 15 hp??

    can i just buy a main jet and carb kit for a 15 hp to cahange my 9.9 to 15 hp?
  4. S

    clinton restore need info

    hi all, I have an old clinton i have taken apart to restore does anybody have the specks and or part numbers for me? all i have is........clinton mfg. model#j-9 ser#74785 type#15-14-9-6-0-7 . there seems to be slop in the wrist pin area so i think i will need the piston to wall...
  5. S

    1963 18hp rude fastwin

    can the ignition system be checked with a multimeter on this motor? i have a very strange problem with it . it starts first pull and runs great till warmed up then drops a cyl. the droped cyl will come back to life at wot some times but dies out at anything less untill cooled off. i think...
  6. S

    maxium boats.....

    hi people,just got a brand mew maxim boat and after one season the motor is making valve noise. i have also found a pile of nuts and bolts in its bilge area along with loose hose clamps and clips, is this common for maxium/bayliners and or mercurisers? ps trading boat in for a 2...
  7. S

    attn,sugar sand /tango owners..

    Hi guys. i just baught a new 17ft maxum I/o and have had nothing but troble with it, so i am sending it back where it came from. the boat i am thinking of replacing it with is a sugar sand tango gt . the ss gt comes with 3 motor options... a merceury v-6 210hp,240hp or an optimax250hp. i have...
  8. S

    is this normal fo a new motor?

    hi all ,just baught a new 18f maxim with a 3.0 mercruiser. the motor has that new e-z start carb. the motor runs rough at idle and makes a loud hisss noise at idle(sounds like an air compressor hose) and the thing just started making valve train noise :mad:This is my first I/O so i am not sure...
  9. S

    dol-finz more drag than gain????

    hi i hav just gotton a motor with one of thoes fins on it. the thing realy keeps the bow down but i seem to use much more gas. has their ever been any tests on thease things? are they good,bad,or a joke?
  10. S

    replace main jet or try "sea foam:?

    hi. i have cleaned and cleand the carb on my '94 9.9hp jhonson and i can see a good spray of gas at wot but it still lacks about 500 rpm unless i tap the primer button about once every 5 seconds. the motor runs awsome except for this and a very slight ping noise at mid throttle. once in a great...
  11. S

    throttle cam adjustment?

    should the butterfly valve be fully open(horisontal) when the throttle lever is at wot on a 1994 9.9hp jhonson? i am having a problum with this motor not reaching maxium rpms without tapping the primer button. i noticed that the valve is only about 75% open at wot. can someone tell me the...
  12. S

    no full power without holding primer in

    I've been working on a 1994 9.9 hp Johnson with electric start. motor has sat for a few years - finally got it running by cleaning carb. and putting new spark plugs. it runs good and has good compression - holds an idle and even planes my 15 ft. boat off. the problem i am having is that after...
Top