Search results

  1. S

    1965 33hp johnson slowly stalled at WOT

    I took my boat and motor on there maiden voyage yesterday. Everything was great all day. Until the end at WOT the motor just slowly died down then quit. It started right back up ran rough for about 10 seconds then was fine. Ran it for a couple minutes then went in. It has been suggested that...
  2. S

    Are Uflex and teleflex compatible?

    I am trying to update my steering from pulley to teleflex or uflex. Are the components interchangeable. Most importantly the transom support tubes. I am looking for used parts but i want to know if they all have to be from the same manufacturer. Thanks
  3. S

    Epoxy PLus vs Gluvit

    I am just looking for some opinions. I have ordered gluvit for my boat 1 quart for a 16ft boat. I have been thinking it may just be enough. Just out of curiosity the other day I spread some epoxy plus 50/50 on some aluminum in the transom area of my boat when I was coating the transom boards...
  4. S

    low speed valve threaded bushing loose??

    I have a 1965 33hp Johnson. I am tuning up the carb but I have a problem. The threaded bushing inside the low speed valve housing just spins. Does it need to be "glued" back in place or is it just suppose to stay in place by the packing and nut??
  5. S

    1963 Starcraft transom corner

    I am missing a transom corner on the starboard side of my boat. Along with some other things:) If anyone has an idea of where I could find one or something that could work at a reasonable cost that would be great.
  6. S

    1963 Starcraft 16ft total remod

    I have so far sanded primed and painted. But now I have it on the trailer right side up again and I have to start the real work. I am starting at the transom and working my way forward. First off my question is if I take the splashwell out can I leave it out? I am going to replace the transom...
Top