Search results

  1. T

    VHF radio interference

    I never had any interference until I upgraded my trolling motor. Went from a 12v Minn Kota Powerdrive to a 24v Minn Kota Ulterra and now getting major interference on the VHF. I need to max out the squelch. Any ideas how to fix this?
  2. T

    Waterproof dust caps

    I find my EZ lube axle is letting water in after submerged. I think its getting past the little rubber cap. Can I switch to the solid dust cover to make it more waterproof? I don't mind removing it to add grease. What other options are there to make it more sealed from water?
  3. T

    Made a rearview towing camera

    more pics
  4. T

    Made a rearview towing camera

    With the height of my boat I can't see anything directly behind me. So I made this little setup. Sooo happy with the results. I wish I did this years ago. The camera isn't waterproof. I make a waterproof case from 3/16 plexiglass. Acrylic weld and also marine silicone on seams as extra...
  5. T

    Made a brake tool for the launch ramp

    I always launch and load solo so nobody to hold the brakes for me. This holds the brake pedal down so my car doesn?t accidentally roll down into the lake. lol Parking brakes by design don?t hold so well in reverse. Also when they are wet they don?t hold as well. Parking brakes only lock the...
  6. T

    Made a winch strap pulley

    I've had trouble pulling the boat onto the bunks on shallow ramps. I've tried the silicone trick which helps a little but not enough. I always dunk the bunks to assist is friction. Anyways, I saw this in the store and thought it would be perfect for those situations. No real modifications...
  7. T

    High pressure fuel filter

    Tried the search but could not find any real answers. Manual says the high pressure fuel filter can only be changed by a qualified dealer. Low pressure filter is ok to replace by owner. Has anyone changed it before? I'm guessing the pressure can be released via Schrader valve and replaced as...
  8. T

    Is my nut too tight?

    I've got metal to metal wear marks on only one side of my prop and one side of the housing. Wondering if my main nut is too tight or the shaft is bent. It spins freely when in N. No vibrations at any speeds. I torque to 55 lbs and then tighten a little more so the lock tabs match the flat...
  9. T

    Changing prop in the middle of the lake

    It was close but I was able to get to shore and remove it properly. Got me thinking. Any tips on how to change a prop (outboard) in the middle of the lake without going for a swim? My 115 Merc is so far back when tilted up. Way out of arms reach.
  10. T

    21 pitch

    Hi, I've got a 115 Merc 4 stroke pushing an 17.5 aluminum fishing boat. I wanted more top end speed and was thinking of a 21 pitch prop. My hesitation is the Spitfire 4 blade 21 pitch says for engines 135 hp - 300 hp. My 17 pitch 4 blade aluminum runs 6400 rpm at 40 mph My 19 pitch 4 blade...
  11. T

    Did cavitation cause this?

    Is this normal wear? My engine is almost new (less than one year old) 115 Merc. Its a little disconcerting for me.
  12. T

    HDS-5 and AIS traffic

    I've got a series 2 HDS-5. Is it capable of displaying AIS marine traffic on the chartplotter? If so, how would it connect? Thanks!
  13. T

    New motor up in smoke

    My new 2014 115hp suddenly shorted out last night. I started smelling something burning then lots of smoke and even a small fire. Can anyone tell me what is located in this area? Thanks http://i581.photobucket.com/albums/ss260/Ctrl-Alt-Delete_BSOD/Boat/photo_zps9107df50.jpg
  14. T

    Charging house battery

    I want to charge my trolling motor battery (12v) when out on the water. I'm torn between getting an ACR or an on-board alternator charger. They are about the same price and (to my knowledge) do the same thing. Please help me decide which to choose and why. Thanks
  15. T

    LED lights not working properly. Pulse Width Modulation?

    Re: LED lights not working properly. Pulse Width Modulation? I made this and its fixed all my issues. It looks real ghetto but I don't care. Thanks guys for you help
  16. T

    LED lights not working properly. Pulse Width Modulation?

    Re: LED lights not working properly. Pulse Width Modulation? I'm getting fast blinking on the LED trailer lights. Never had any issues with regular trailer light. Its a factory installed trailer package on 2013 Escape. If I combine regular lights with a small LED side marker, everything...
  17. T

    LED lights not working properly. Pulse Width Modulation?

    Re: LED lights not working properly. Pulse Width Modulation? Here is a sample of the resistor
  18. T

    LED lights not working properly. Pulse Width Modulation?

    Hi, I recently upgraded my trailer lights to LED lights. After doing so and checking everything, the lights did not work properly. I found out my new Ford does not work with the conventional 12v system. It uses Pulse Width Modulation (PWM) instead. LED lights and PWM do not seem to work...
  19. T

    How to lower charging voltage

    Hi, I've got a '88 Johnson 60HP 3 cyl. and it charges at 16.5-17.0 volts at cruising speed. I hear its normal to charge this high on a non-regulated system. Is there any way to add a regulator to it? Is there any way to drop the voltage down a little? I just installed a automatic charging...
  20. T

    Trim gauge

    My old engine had no power trim. My new (used) 88' Johnson 60HP has a power trim/tilt. I want to hook up a trim gauge but dont know where the wire go. The sender has a black white and green coming off. Can anyone tell me where these wire go? I tried to trace them but kept losing them
Top