Search results

  1. M

    water discharge help

    evienrude 9.9 E10RCSE have been running this motor since last summer and it has always driped from the (telltail?) the small hole on the right top(black grommlet). and would spray water and mist out of the double holes in the center. Recently it stoped moving water all together. The impelller...
  2. M

    76' John 15 77' evienrude9.9 questions

    I have had an evienrude 9.9 (e10rcse) on my boat for about a year. i was given a 15 seahorse (15rl76a) not running (yet) with a busted lowerend. the motors look exactly the same other then paint. 1) how can the johnson push out 50% more power with the same "block"? 2) can the lowerunits be...
  3. M

    93' StarCraft 16' project

    Re: 93' StarCraft 16' project Finaly made some progress today. I got the wires sorted out, the foam laid in the hull, i used the pink sheets as you can see. I used spray foam as glue to hold all the little pieces together. Once i screw the deck down it should be nice and tight, i hope it doesnt...
  4. M

    "New" chrysler motor

    Good friend of mine just pulled up with a 15 horse. We have no idea what year. It started up ok with the starter fluid the PO sprayed in it just before my buddy bought it. but the gas in the tank was from last year, i insistted my buddy ditch the gas and start with fresh. Problem is we dont know...
  5. M

    93' StarCraft 16' project

    Re: 93' StarCraft 16' project i finally got the boat painted!! i bought a HF spraygun and thin the paint about 20%. It came out pretty nice. I got a real nice piece of plywood at a local distributor, 5x12 3/4 9 ply Ext. cut and epoxyed. thats the underside of the deck, the top looks even...
  6. M

    93' StarCraft 16' project

    Re: 93' StarCraft 16' project I cleaned up the hull alittle better and found a few holes. they are pretty small. what can i do about it? fill it with jb?, drill out and install a rivet?
  7. M

    93' StarCraft 16' project

    Re: 93' StarCraft 16' project Here are the pics.......... you can see where the hull is discolored and pitted. I i think thats why i was told its anodized(its not). So what i need to know now is, whats the best way to clean this up? how abrasive can i get? Obviously i dont wanna wear thru the...
  8. M

    Anodized Aluminum info

    I started this thread to gather info on anodized aluminum. How to tell if the metal is anodized or not? What do you need to know before painting an anodized surface? What the heck is "anodized"? Did i spell it right? General info? Why do i need it? thanks alot to all repliers!!
  9. M

    5'x12' MG plywood??

    does anybody know where i can get 5'x12' (1/2'') mg??:confused:
  10. M

    93' StarCraft 16' project

    Re: 93' StarCraft 16' project i got snowed on again! today wasnt to windy so i drilled out the rest of the rivits, pulled out the live well and the back bench. easy enough. then i pulled up the decking and put it to the side for a template. i can belive how flimsy the center stringer is! i...
  11. M

    93' StarCraft 16' project

    today i started my "winter" boat project. the floor is very weak in some spots so that is the main project. most of the carpet is in bad shape as well. as of right now i dont have any electronics other then the lights and livewell, and a rigged up bildge pump i thru in, in the middle of last...
  12. M

    rivit replacement

    hey guys, i need to remove then reinstall some rivets in my hull. they secure the benchs and livewell to the side of the boat. they are all above the waterline. i must remove all the boxes and bench to replace the floor(i would have to use very small pieces and slide under if they stay). i have...
  13. M

    fishfinder

    :confused:i am looking for a good unit for around $200, i fish shollow ponds and rivers, mostly for bass. whatta ya think???
  14. M

    Night Lights

    I do most of my fishing at night in a small river. i have been looking at differnt lighting options. the river is only about 70 feet across and lots of turns and floating logs. what kind of lights are you guys using to get around? anybody tryed the go-light remote spotlights? what are you using...
  15. M

    Foam in the boat?

    i have a starcraft sf16. the boat has foam under the back bench seat. i am sure under the floor is foam aswell. Is it a bad idea to remove some of the foam under the seat to make room for storage? If the foam is above the water-line it only counts as wieght in the boat right? Of course the foam...
  16. M

    Is this normal?

    there is black "oil" leaking out, is this just unburned fuel residue?:confused:
  17. M

    how does my o/b charge my batts.

    i just bought an out board with an altanater?:rolleyes: do i need a on board batt. charger or do i just hook the wires to the batt.? if so can i have the wires from the o/b / charger on the batt. at the same time as my lights or trolling motor? thanks.:confused:
  18. M

    gas:oil for eiven 9.9 #e10rcse

    hey guys i just bought a 9.9 eivenrude, i forgot to ask what mix it takes:redface:
  19. M

    thinking of buying this motor 35 johnson

    i am goin to look at this motor for my 16' startcraft sf, are there any common probems with this model i should look out for, what do you think its worth(assuming it runs good) thanks!!
  20. M

    1973 9.5 rebuild!

    ok so if you read my post about the water tube coming out of the powerhead, then you know i am about to atempt my first major outboard repair. Actualy it is my frist o/b i've owned and i have NO exp with boat motors:redface: i still need a manaul or at lest a copy! but i thought i might aswell...
Top