Search results

  1. S

    bravo one drive shaft.

    I also have a beam inch pound torque wrench and neither one shows any resistance
  2. S

    bravo one drive shaft.

    dial wrench and inch pounds
  3. S

    bravo one drive shaft.

    installed new bearings per the manual but I can't get any resistance after tightening the nut all the way I double checked and everything is put back correctly
  4. S

    engine alignment problem

    just finished putting new 7.4 long block with a new coupler in my formula 29 pc. It seems that the the alignment tool will not go in because the engine needs to move sideways in the back about 1/8 inch. We have moved it in the front side to side and up and down and it needs to move in the rear...
  5. S

    engine coupler

    In the process of changing out my 1988 7.4 liter engine and after removing the engine coupler i noticed rubber shavings around the inside hub. I believe the hub has been spinning because I've had a problem with the engine turning up and the boat bogging down. My question is this the right...
  6. S

    shift cable insert came out.

    While pushing through my new shift cable on my bravo one outdrive, the plastic insert in the gimbal came through into the bilge. My question is it necessary to put it back. I cant reach it as these 454 engines take up just all the space in the bilge.I would probably have to remove the riser and...
Top