Search results

  1. Bondo

    Need help with mercruiser 454 carburetor

    Ayuh,...... Welcome Aboard,...... Being a '92, it could be a Quadra-jet, which ended 'bout that time, or the Merc/ Weber AFB, which was intro'ed 'bout that time,.... If the Quadra-jet, it can be tuned to run on yer motor, no problem,..... Post a picture of what you've got,.....
  2. Bondo

    If Brand New OEM Sealed Gimbal Bearing got wet for 2 days is it toast?

    Ayuh,..... If it feels smooth, it's Ok, atleast for awhile,....
  3. Bondo

    Clever way to dry dock test new bellows for leaks

    Ayuh,..... If the boat ain't floating, yer not testing it,..... The best bet, it do it right,....
  4. Bondo

    older carburetated mercruiser 5.7 hard start

    Not necessarily, the coil fires when it's grounded,....
  5. Bondo

    1989 OMC 4.3 Trim and Tilt Cylinder rebuild question

    Ayuh,........ I think that's what the 4 holes in the end of it are for,......
  6. Bondo

    Mercruiser Drive Coupler Question

    Ayuh,...... The outdrive won't care, but the motor might with the set-back on the long, : short coupled,...... The crankshaft bolt pattern should also be the same,....
  7. Bondo

    Need help modifying a trailer to fit a boat.

    Ayuh,...... Welcome Aboard,...... Get the boat off the wagon 1st, so we can see what you've got to work with,.....
  8. Bondo

    What’s my engine

    Nope,......
  9. Bondo

    Shift cable adjustment

    Ayuh,..... Whatcha workin' on,..??
  10. Bondo

    Mercruiser 3.0 overheated, Is my motor shot?

    see post #34
  11. Bondo

    Brown transmission fluid

    Ayuh,..... What transmission,..?? What motor,..??
  12. Bondo

    2003 Four Winns 268 Vista Main Harness Wiring

    Ayuh,........ What motor, 'n drive,..??..??
  13. Bondo

    Brown transmission fluid

    Ayuh,......... Whatcha workin' on,..??..??
  14. Bondo

    Water leak

    Ayuh,..... Yes, you should find, 'n fix the leak, though it's better to find it, at rest, in the water,.... A camera in yer hand, can help you see, where yer head don't fit,....
  15. Bondo

    Spark Plugs for a 1985 Mercruiser 3.0 Alpha One 140hp

    Ayuh,......... Those are too long, should be MR 43T,.....
  16. Bondo

    Boat stalling when toggling between Forward and Reverse (Docking)

    Ayuh,...... Welcome Aboard,....... Alpha's need to be shifted Briskly, or the shift-interrupter can do that,....
  17. Bondo

    Volvo Penta Leaking water.

    Ayuh,....... That's a gusher,...... Bad bellows,... Corroded y-pipe,.... Rotten transom,....
  18. Bondo

    Starter Bolts 1985 Merc A1-G1 3.0 140hp

    Ayuh,..... If you've got the motor out, it's a cake walk,..... I've done a 3.0l in the boat,.... Center punch the stubs, drill a hole through 'em, 'n easy-out 'em out,..... The ones I did in the boat, I used a battery powered right-angle drill motor, 'n lefthanded drill bits,... Didn't...
  19. Bondo

    How can I unmount starter from Mercruiser 2.5。.

    Ayuh,..... Remove the 2 bolts at the aft end, it'll drop down, 'n out,..... If necessary, loosen the bolt in the block on that bracket,.....
  20. Bondo

    New Starter for 4.3l 3 post solenoid

    Ayuh,...... It's been a long time, but that terminal used to power the points, at battery voltage when starting,....... Now-a-days, it powers the fuel pump, during starting,.....
Top