Search results

  1. Bondo

    Oil filter socket

    Nope, but they're standard Chevy filters,.... 4.3l is the only oddball,....
  2. Bondo

    350 Magnum - exhaust riser damaged brass plug

    Ayuh,..... 'n both pieces have to be perfectly clean metal, 'n perfectly flat,....
  3. Bondo

    Gears with engine off

    Ayuh,..... It should turn both ways, freely in neutral,...... In forward or reverse, it should lock in one direction, 'n ratchet in the other direction,.....
  4. Bondo

    Electronic fuel pump.

    Ayuh,..... Not sure what that means, but yes, carbs are fed with 4 to 6 psi,....
  5. Bondo

    Maintenance - New owner of 89 Mercruiser 4.3L Alpha One

    Ayuh,...... Many of us just run quality diesel motor oil,.... I run 15W-40 rotella in all of my motors,....
  6. Bondo

    Alpha drive for a V8 whats the ratio?

    Ayuh,..... Welcome Aboard,..... I moved yer post to the prop forum,as that's the basis of yer question,..... How did the boat behave with the old prop,..?? What was the rpms at Wot,..?? How does it behave with the current prop,..?? What are the rpms at Wot with it,..?? What's the pitch...
  7. Bondo

    does anyone know?

    Ayuh,..... I completely agree with dubs,.... yer missing 1/2 of yer drain fitting,.... 'n when I find a drain like in #16, I toss it overboard, 'n use a plain ole brass 1/4" pipe plug,.....
  8. Bondo

    Engine just clicks but no start

    Ayuh,..... Welcome Aboard,..... Looks can be deceiving, so unless you take 'em apart, 'n clean 'em as Scott says, they can still be a problem,.... 'n don't forget the Grounds,....
  9. Bondo

    Maintenance - New owner of 89 Mercruiser 4.3L Alpha One

    Ayuh,..... Welcome Aboard,..... Good info in this thread, but I take exception with Qboy on this grease comment,..... Quicksilver 2-4-C is a teflon based grease, 'n is the Best for bushing type bearings,..... But,.... It should Not be used on any ball, roller, or needle type...
  10. Bondo

    Mercruiser lower reinstall, small problem

    Ayuh,...... It's stainless steel, fits the shift shaft, 'n is ever so slightly concaved/ convexed,.....
  11. Bondo

    Help with new Lenco Trim Tab Switch

    Ayuh,..... What did you expect,..?? There ain't no "Easy" button,.....
  12. Bondo

    Brightside polyurethane painting

    Ayuh,....... Rustoleum industrial enamel, 'n majic hardener is 'bout as cheap as you can get now a days,.....
  13. Bondo

    Help with new Lenco Trim Tab Switch

    Ayuh,..... Have you tried Lenco marine,..??
  14. Bondo

    bad interuptor switch

    Ayuh,..... Welcome Aboard,...... Whatcha workin' on,..??..??
  15. Bondo

    Gear oil reservoir system - 1988 vs 1998 Bravo TA

    Ayuh,..... '88 was the 1st year for the Bravo, 'n I believe it didn't have the remote oil bottle, so there'll be no plumbing either,.....
  16. Bondo

    Is my Mercruiser fuel injected or carb?

    Nope,....
  17. Bondo

    Does E3 make marine plugs?

    Ayuh,..... If you've got an OMC Cobra, it's a much older motor, as OMC went belly up back in the early '90s,.....
  18. Bondo

    Does E3 make marine plugs?

    Ayuh,..... AC Delco MR43T,....
  19. Bondo

    Alpha knocking noise video.

    Ayuh,..... No, it's Not,..... As I've said, read, 'n follow our posting rules, 'n guidelines, the link is in my signature, if you wish to be a member of iboats forums,...... In there you'll see, that threads over 90 days old, are closed to any posters, other than the original poster...
  20. Bondo

    Swap an OMC 5.8 with OMC 5.7

    Ayuh,.... I agree, that's no doubt the best way forward,....
Top