Search results

  1. R

    Buy a 5hp Mariner with a blown head gasket?

    How do you know it is a " blown head gasket " ??----Sellers guess ?----If it truly is a blown head gasket and clean it might be a good deal.----There are different models.----Even an air cooled one.----Any idea of serial # or a picture?
  2. R

    1987 40hp evinrude vro (oil deleted) carb issue?

    Red lever must be inline with valve body to run.
  3. R

    This happened today, and in the blistering heat.

    Looks like new chain is needed as well.-----Look for non stainless nuts / pieces inside the hull.
  4. R

    This happened today, and in the blistering heat.

    On a project boat I replaced the rotten wood block for the bow eye.-----Installed a second eye for safety chain.----Used solid glass salvaged material.------No more wood for me.
  5. R

    1969 Evinrude V4 85Hp starflight 85993 tilt?

    ---evinrudeparts.ca------Might be able to help you.-----Aftermarket unit can also be fitted.-----Power tilt was available in the early 60's on the 75 hp models.
  6. R

    1969 Evinrude V4 85Hp starflight 85993 tilt?

    ??----But there was an optional power tilt available.-----Perhaps find one on E-bay.-----Your location?
  7. R

    Towed some Folk

    Captain of the ANDERSON was asked to turn around and look for the FITZGERALD.-----Coast guard said that they were NOT ordering the ship to turn around.
  8. R

    Need control box

    Your location ?-----Should be lots of used ones available as they were common for many years.
  9. R

    Smoking starter?

    It is simple to take starter apart for inspection.----Do that before you rush out and buy a new one.----If starter is good then look for wiring ( loose ) issues.
  10. R

    Getting a 2024 Merc 150 4 stroke- any surprises?

    Agreed ----saw a new looking 4 stroke 115 HP on a pallet a few years ago.-----Asked the dealer if he was selling these 4 strokes now.-----He said ---" No , it blew up and boat was repowered "
  11. R

    Johnson 150/175 carb saw

    When you push the key in ( not cranking ) the electric primer valve opens.----And it does nothing if there is no fuel pressure to it.-----So when motor is cranking the fuel pump puts pressure to it.-----Fuel from primer valve then sprays directly into the intake air flow.-----Very simple unit...
  12. R

    Went to the lake and nearly got that sinking feeling...

    Check / replace the hoses ?
  13. R

    Towed some Folk

    Was out fishing alone on a fairly rough day on Lake Huron.-----Some folks on the only other boat out there waved at me.----So I waved back.----And 20 minutes later they waved again.-----Thinking that nobody is that friendly I trolled over in my capable boat.------They said " can you tow us to...
  14. R

    Getting a 2024 Merc 150 4 stroke- any surprises?

    Not many folks who buy the latest / greatest new technology are concerned these days.----People buy electric vehicles from start up companies as an example.----Would you buy that new car if you knew that head light lenses were $2000 or so?-----Or if it is $150 labor to install a new 12 volt battery.
  15. R

    '85 7.5hp, rebuilt water pump. Still issues with water flow to engine

    If it shifts from forward to neutral you just need a bit more effort to get reverse.----And if the gearcase was replaced with unit from say 88 to 96 the drive balls ( no clutch dog ) might be missing.----Did one once where I assume the balls fell on the floor and went away.-----Unit was...
  16. R

    1990 2 stroke evinrude 40 hp

    I do not believe there is a wire going to thermostats.
  17. R

    Looking at a pontoon w/ 06 115hp Optimax

    See your local dealer and get his opinion on parts availability / cost of service.----Do a compression test before you decide on it.-----Or better yet just walk ( run ) away.
  18. R

    Need your opinion about replacing the original Reed Valves in my 1986 Evinrude 30 hp.

    I would say motor is running too cold when trolling.----Check thermostat.-----Should be able to troll for a week without having to change plugs every hour.
  19. R

    Need your opinion about replacing the original Reed Valves in my 1986 Evinrude 30 hp.

    Other than guessing about the reed valves , what trouble shooting has been done ?
  20. R

    Engine power loss

    Run fuel out of the carburetors when you are done boating.-----Empty carburetors stay clean.
Top