Search results

  1. K

    Bonding wire Volvo sx-m

    Where does the other end of the bonding wire that runs from the top corner of the pivot housing go? I took it apart a while ago and am embarrassed to say that I can’ t remember where it goes. It has a 1/4-20 screw on both ends. Thanks
  2. K

    Fuel sender leaking

    Hi guys, I changed out the sending unit in my gas tank last year, now when ever I fill the tank it leaks fuel from around the flange. The boat has a plastic tank with threaded inserts moulded into it. They are not stripped. I have tried several gasket cements like permatex etc. Anyone have any...
  3. K

    Volvo penta stalled now won’t start

    Hi guys, i’ll Try to make this short. My Volvo Penta was running great the other day, I went to throttle down and the engine stalled. I tried to start it again to no avail. It wanted to but didn’t. Anyway when I got it home I put a couple of drops of gas in the carburetor and it fired right up...
  4. K

    Scupper drain

    changing scupper drain placement.
  5. K

    Oil change

    Hi Guy's , I'm sorry to say that this season i won't be able to get much more than 30hrs. on my boat. That being said I would like opinions on weather I should have to change the engine oil with so few hrs. before putting it to bed for the winter. Thanks
  6. K

    5.0 Volvo penta oil pressure

    Hi, Guy's I noticed last season my oil pressure gauge fluctuating a couple of lbs. I checked it with a test gauge with same results. Anyone have any ideas what would cause this? This seems to be just at idle. Thanks.
  7. K

    Hot riser temp

    I'm new to the forum so please bear with me. I have a 2000, 5.0GL Volvo Penta. I'm diligent about maintainence with my boat so for PM purposes I replaced exhaust manifolds and risers, it was about 7 years since it was done. New raw water pump last year but replaced impeller this year due to my...
Top