Search results

  1. D

    mercury 240 efi sportjet question about manual

    Im having trouble finding a manual for mine. It came in a 2000 model challenger boat but all i can find is 2001 to present manuals. Is there a difference with pre 2001 or am i missing something? Any help wold be appreciated thanks. 240 sport jet efi m-2 in a 2000 model challenger 2000
  2. D

    40 hp overcharging questions.

    I have a 93 model 40hp evinrude. I took the boat out to day and noticed my volts were at 16 while running and around 14 at idle. It also showed 16 on my depth finder so I know it isnt the guage. Was wondering if anyone had any advice on what to look for or check before I just order a...
  3. D

    Rate my current rpm/mph and help suggest new prop or tell me to leave it.

    I have a 1993 pro 17 bass tracker with the factory 40hp evinrude. Fresh rebuild bored .30 all new parts. Motor runs like a champ but is turning a little much for me. It has a 3 blade 11-3/4 x 17 prop. I have no idea if its stock or even close to what it should be. The anti cavatation or...
  4. D

    Where do i get omc manual?

    I found the seloc but where do i get the omc manual? Imk looking for a 93 40hp evinrude. I found a 94 on ebay would this work? thanks
  5. D

    Cant finf replacement lower crank seal please help

    Im fixing to place an order here and cant find the seal I need. It a 93 40hp evinrude. Im looking for the lower crank seal. Unless im calling it the wrong thing. I have the seal in my hand and the part number is 339014 but cant find that omc number on this site. i ve already ordered a...
  6. D

    Crankcase to block question

    I know there are upper and lower crank seals but is there supposed to be a gasket between the crank case and block? If not do you use any sealer or just torque it down?
  7. D

    40hp bolt torque spec help please

    I have searched and the manual I have doesn't cover this. I need the torque specs for rod bolts and crank casebolts please. Its a 93 40hp evinrude. Thanks for any help.
  8. D

    40hp down a cylinder, running lean question

    I just inherited a 1993 basstracker with 40hp evinrude down a cylinder. I tore the motor down to find a cyl, piston and rings scarred heavily from no oil. Ive had the block fixed got all my new parts and am putting it back together now. What im wondering is what would cause this to make sure...
Top