Search results

  1. Space_Tex

    3 blade to 4 blade prop on 90 HP Mercury- 18 ft. Aluminum Semi V

    I recently purchased an 18 foot Aluminum semi-V boat with a 90 HP Mercury 2 stroke. It currently has a 3 blade SS Raptor 13.25 x 17 prop on it. I have yet to get to WOT on it because I hit about the 6000 rpm mark and back it off before I get to full throttle (this is three people on board, but...
  2. Space_Tex

    Talon Side Bracket And CMC Jack Plate

    Anyone else have any luck with mounting the Talon Side bracket to the CMC PL-65 Jack Plate? I asked the CMC customer service and they said that the Minn Kota Talon side bracket WOULD work with this jack plate.
  3. Space_Tex

    Flush Quick disconnect for Mercury 2 Stroke

    I recently purchased an 18' Aluminum semi V with a very clean 2001 Mercury 90 ELPTO 2 stroke. Everything is running very smooth, I just had a question about adding a quick connect for flushing. I have the boat in a boat house above the water so putting the earmuffs on is a bit of a pain and it...
  4. Space_Tex

    1988 Johnson 28 SPL Primer issue and Flusher

    I'll try your method this evening and update you after I see what it does. Just another piece of information, before I cleaned the carb and it wouldn't throttle up, i removed the spark plugs and the top cylinder was very clean/ dry so I think it wasn't getting gas. After cleaning the carb and...
  5. Space_Tex

    1988 Johnson 28 SPL Primer issue and Flusher

    I recently purchased a Jon boat with a 1988 Johnson 28 SPL motor on it. It would start right up but bog down when any throttle was applied. I pulled the carb off and cleaned it out and it seems to be running A LOT better now. My question is now about the primer. I know the position of the red...
Top