Search results

  1. S

    98 Merc 60-cough,konk out,high speed reduced

    My98 merc 60 outboard has sat up for 6 mnths, has water separator and new gas installed. Engine starts and coughs runs like 2 of the 3 cyl are firing and wants to stop. On the water, higher speed wants does not want to go high speed, it wants to flood out and not want to start. Its been...
  2. S

    Draining foot oil on 75' 2hp johnson question

    Looking at the diagram and engine, i see the drain screw for the foot oil, i see no vent screw, can i assume that you undo screw to drain, then place the engine on the side and add foot oil until full? Or is their another method to the madness here?
  3. S

    75' 2 hp johnson, can i put merc foot oil in it?

    I have a 2hp johnson 75' ventage motor, i am try to start and have read about the sleeping engine coming awake, my question is: since i have some merc foot oil laying around, can i drain the existing foot oil out of the 2hp johnson and replace it with merc foot oil for testing purposes?:confused:
  4. S

    2 hp ,75 johnson, #2r750, air cool or water?

    Oldie but goodie, not used in 20 years, fill on the top, controls on the front, 1 pull start. Is this a air cool or water cool? Does it have foot oil?
  5. S

    Electric starter, 1st outing problem only!

    I have a 98 murcery 60 elpto outboard, every year of the last 4 years, i try to turn in over and just get a click when trying to start. Finally after several trys it will finally engage and start. It will do this on the water about 1 more time, not good for the faint of heart on the water...
  6. S

    Having your spun prop fix?

    I had a spun merc 60 prop fixed,:( about $41 and about 30 minutes of your time:eek: . They popped out the spun piece with a press, carved out the rest of the broken off rubbed, sand blasted the core to remove any left residue, pressed the new splin with rubber back in and your done. Just make...
  7. S

    Hub man question!

    Can a prop shop determine quickly whether you have a spun hub or not!:( My prop come off of a 60 merc outboard about 1998 model, the prop is off the boat, i see no rubber bushin in slide like my orginal prop. Boat only goes about 3mph before the engine reves up with no movement.:cool: (made...
Top